hey i have a 1989 honda elite sb50p and a variator out of a 87 elite se50p i wama put it into my 89 elite . what stock roller weights are in that and what ones should i get to get faster speed and not trash my axceleration i weigh about 235lbs for the clutch a want to get a new center spring and new grab springs but what rpm ones shoud i get to get going good and faster andf have good exel
.thanks alot
i need help going a little faster
Moderator: Moderator
i need help going a little faster
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
Re: i need help going a little faster
im not so sure that vari will fit the sb50
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
Re: i need help going a little faster
you dont think so
odinxxix wrote:im not so sure that vari will fit the sb50
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
-
martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: i need help going a little faster
will not fit non variated.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: i need help going a little faster
can i put some cluch springs in it
martynkim wrote:will not fit non variated.
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
-
martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: i need help going a little faster
spewya wrote:can i put some cluch springs in itmartynkim wrote:will not fit non variated.
If you find ones that fit. IDK of any.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: i need help going a little faster
can i do the pully mod with a se50p clutch in to me sb50p
martynkim wrote:spewya wrote:can i put some cluch springs in itmartynkim wrote:will not fit non variated.
If you find ones that fit. IDK of any.
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it