engine temps

killerpancake · Post by **killerpancake** » Fri Feb 25, 2011 8:38 pm

I've been searching through the forum but couldn't find anything on what the engine temp usually sits at on a Honda spree when running. Does anyone know?

killerpancake · Post by **killerpancake** » Sat Feb 26, 2011 12:04 am

anyone got a rough guess?

killerpancake · Post by **killerpancake** » Sat Feb 26, 2011 12:16 am

Ok, so the reason i ask is because im getting a programmable temp gauge, you can program it to set your own temps for overheating and being cold, so i just need an idea of where HOT would be set at. I think 215 is operating temp, and above 240 is overheating... or is it 200 is operating temp and 215 is overheating... i really don't know for sure.

bakaracer · Post by **bakaracer** » Sat Feb 26, 2011 12:45 am

Those temps are for watercooled. 370 would be your danger zone for a cast bore.aluminum 410. Keep in mind that if your running cheapo 2 stroke non synthetic then those temps will be a little lower.

killerpancake · Post by **killerpancake** » Sat Feb 26, 2011 6:16 pm

Thanks for the info. I assume this is correct info since no one is correcting you.

thanks.

toboggan · Post by **toboggan** » Sat Feb 26, 2011 7:17 pm

yepp. bakaracers info is good!

Honda Spree and Elite 50 Forums

engine temps

engine temps

Re: engine temps

Re: engine temps

Re: engine temps

Re: engine temps

Re: engine temps