Honda Spree and Elite 50 Forums

Posted: **Sun May 08, 2011 12:22 pm**

Im getting spark and have the fuel and oil mixed correctly. What carb settings should it be on?

Posted: **Sun May 08, 2011 12:26 pm**

SpreeMadness520 wrote:Im getting spark and have the fuel and oil mixed correctly. What carb settings should it be on?

1.5 to 1.75 turns out on both the screws to start

Take a look at the plug........is it wet?

Posted: **Sun May 08, 2011 12:29 pm**

I got it to start for a couple secs then it bogs and dies....I put some gas through the spark plug hole. Its gotta be the carb

Posted: **Sun May 08, 2011 12:40 pm**

Its doing the same thing still...

Posted: **Sun May 08, 2011 12:41 pm**

Or a petcock issue?

Posted: **Sun May 08, 2011 12:43 pm**

No its getting gas, When I open up the float bowl gas leaks out so maybe the needle is stuck?

Posted: **Sun May 08, 2011 12:48 pm**

Its not the jet is it?

Posted: **Sun May 08, 2011 1:29 pm**

Someone please tell me what im doing wrong....

Posted: **Sun May 08, 2011 1:41 pm**

Ok it will idle for a while but when i give it gas it bogs out and dies.....FML

Posted: **Sun May 08, 2011 2:14 pm**

SpreeMadness520 wrote:Its not the jet is it?

No it is not the jet. The carb needs cleaning per instructions in Wikispreedia.

Posted: **Sun May 08, 2011 2:20 pm**

Nope I got it running, Turns out one of the tubes on the carb was plugged. Man does to 2000k clutch springs rev high

Posted: **Sun May 08, 2011 2:23 pm**

SpreeMadness520 wrote:Nope I got it running, Turns out one of the tubes on the carb was plugged. Man does to 2000k clutch springs rev high

Like a stall converter for your spree.

Be careful not to flip over

Posted: **Sun May 08, 2011 2:54 pm**

Hmm its still being weird, I left it for like 30 mins to go get some zip ties and now its back to the same thing

Posted: **Sun May 08, 2011 3:15 pm**

SpreeMadness520 wrote:Hmm its still being weird, I left it for like 30 mins to go get some zip ties and now its back to the same thing

I dunno, maybe you should make another thread

Posted: **Sun May 08, 2011 3:18 pm**

Sorry man I need help and I will ask any questions I d*** well need.

af16 wont start?