Fill in by-starter hole

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
toad772
Elite
Elite
Posts: 385
Joined: Fri Jul 16, 2010 11:34 pm
Location: New Brunswick, Canada.

Fill in by-starter hole

Post by toad772 »

Well my by starter is completely screwed It has no wires on it and it is busted all to * so I want to remove it and fill in the hole. So how do you think I should do it?
Image
PS3 it only does everything.
User avatar
richdavison34
Elite
Elite
Posts: 341
Joined: Sun May 15, 2011 9:03 pm
Location: Las Vegas

Re: Fill in by-starter hole

Post by richdavison34 »

Buying a new one may be your safest...and ultimately cheapest....alternative. :imo:
"Normality is an illusion rooted in the disease of fear, the unafflicted labeled insane".

"The removal of ignorance is more important that the acquisition of knowledge."

1984 Honda Aero 50.
Carb Swap. Cone filter.
User avatar
odinxxix
CB900F
CB900F
Posts: 1640
Joined: Mon Jun 15, 2009 1:09 pm
Location: lafayette,Indiana

Re: Fill in by-starter hole

Post by odinxxix »

if you fill in the hole just how is it going to run while its warming up? think id find a new or used one. or you could get a manual choke like bear has.
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
User avatar
toad772
Elite
Elite
Posts: 385
Joined: Fri Jul 16, 2010 11:34 pm
Location: New Brunswick, Canada.

Re: Fill in by-starter hole

Post by toad772 »

odinxxix wrote:if you fill in the hole just how is it going to run while its warming up? think id find a new or used one. or you could get a manual choke like bear has.
Has ran fine with it just stuck extended all the time.
Image
PS3 it only does everything.
User avatar
KillinSpree
Elite
Elite
Posts: 592
Joined: Mon Jul 23, 1973 10:24 am
Location: Sylvania, OH

Re: Fill in by-starter hole

Post by KillinSpree »

Brand new on ebay for $35 or pm *mopedmark* and he'll hook you up. Super fast shipping too :thumbwink:
1984 Honda Spree White
1987 Honda Spree Blue
User avatar
toad772
Elite
Elite
Posts: 385
Joined: Fri Jul 16, 2010 11:34 pm
Location: New Brunswick, Canada.

Re: Fill in by-starter hole

Post by toad772 »

The scooter is only gonna be used in the woods but I will check ebay
Image
PS3 it only does everything.
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9684
Joined: Mon Jul 23, 1973 10:24 am
Location: Union, WA.

Re: Fill in by-starter hole

Post by Bear45-70 »

My manual choke system only works on the Aero 80 (1983 thru 1985) and a couple of earlier model scooters that had the heat control vacuum bystarter. Oh and bystarter is one word, not two.
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
User avatar
toad772
Elite
Elite
Posts: 385
Joined: Fri Jul 16, 2010 11:34 pm
Location: New Brunswick, Canada.

Re: Fill in by-starter hole

Post by toad772 »

Well I filled both ends in. Haven't tested it yet because I am too lazy to put the air box back together and bolt the carb back on.
Image
PS3 it only does everything.
User avatar
toad772
Elite
Elite
Posts: 385
Joined: Fri Jul 16, 2010 11:34 pm
Location: New Brunswick, Canada.

Re: Fill in by-starter hole

Post by toad772 »

Runs perfect without the Bystarter on there and isn't all that hard to start(5 kicks)
Image
PS3 it only does everything.
User avatar
dun rite
Board Supporter
Board Supporter
Posts: 709
Joined: Fri Apr 15, 2011 2:07 pm
Location: Naalehu, Hi

Re: Fill in by-starter hole

Post by dun rite »

Hello: what did you fill the holes with?
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
User avatar
toad772
Elite
Elite
Posts: 385
Joined: Fri Jul 16, 2010 11:34 pm
Location: New Brunswick, Canada.

Re: Fill in by-starter hole

Post by toad772 »

dun rite wrote:Hello: what did you fill the holes with?
The bottom end I drove a nail into it a bit then cut it off flush with my scroll saw and the top part were the by starter goes I put the needle in and filled the hole with rtv silicone gasket maker(Both holes could be unplugged if I ever wanted to buy a new bystarter)
Image
PS3 it only does everything.
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9684
Joined: Mon Jul 23, 1973 10:24 am
Location: Union, WA.

Re: Fill in by-starter hole

Post by Bear45-70 »

toad772 wrote:
dun rite wrote:Hello: what did you fill the holes with?
The bottom end I drove a nail into it a bit then cut it off flush with my scroll saw and the top part were the by starter goes I put the needle in and filled the hole with rtv silicone gasket maker(Both holes could be unplugged if I ever wanted to buy a new bystarter)
Well nice job, you have RUINED the carb because now another bystarter will not work on it. :jack:
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
User avatar
motormike
Moderator
Moderator
Posts: 5490
Joined: Wed Dec 29, 2010 10:58 pm
Location: Glasgow, KY

Re: Fill in by-starter hole

Post by motormike »

Well it's off to the Home Depot to pick up a box of 16 sinkers........I'll fix that d*** bystarter.......then I'm gonna ride out to the woods and irritate a bear with my pea-shooter......I'm pretty sure that will do it...........
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
User avatar
toad772
Elite
Elite
Posts: 385
Joined: Fri Jul 16, 2010 11:34 pm
Location: New Brunswick, Canada.

Re: Fill in by-starter hole

Post by toad772 »

Bear45-70 wrote:
toad772 wrote:
dun rite wrote:Hello: what did you fill the holes with?
The bottom end I drove a nail into it a bit then cut it off flush with my scroll saw and the top part were the by starter goes I put the needle in and filled the hole with rtv silicone gasket maker(Both holes could be unplugged if I ever wanted to buy a new bystarter)
Well nice job, you have RUINED the carb because now another bystarter will not work on it. :jack:
Well I could unplug it not gonna though because it works fine without a bystarter.
Image
PS3 it only does everything.
Post Reply