hello,
I tested the regulator on my 83' Aero 50. No resistance on the charging side (w,r), so I need a new one.
i was curious if this one would work?
http://cgi.ebay.com/ebaymotors/Honda-NB ... vi-content
It shows that it fits a NB50M engine, but only shows 85 Aero.
I didn't know if they changed the alternator or wiring?
Thank you
Bill
Quick question on a Regulator for 83' aero 50...
Moderator: Moderator
-
- BMX
- Posts: 26
- Joined: Thu Jun 23, 2011 11:15 pm
- Location: Indiana
Re: Quick question on a Regulator for 83' aero 50...
I am unsure whether it fits or not, but 350290657022 shows a use one fitting 83-87. It doesn't look significantly different from the one in my 83.
Are you sure you checked in the right direction? Manual notes that resisance will only be shown in one direction. Also, the manual displays for a positive ground ohmeter. Results are reversed if using a negative ground.
Are you sure you checked in the right direction? Manual notes that resisance will only be shown in one direction. Also, the manual displays for a positive ground ohmeter. Results are reversed if using a negative ground.
Re: Quick question on a Regulator for 83' aero 50...
Honda says no.
The 1983 and '84 are the same along with,
1984 Aero 125,
1983 - '84 Aero 80,
1984 Gyro and the
1982 - '83 Urban Express Deluxe.
The 1983 and '84 are the same along with,
1984 Aero 125,
1983 - '84 Aero 80,
1984 Gyro and the
1982 - '83 Urban Express Deluxe.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- fightingplankton
- CB900F
- Posts: 1119
- Joined: Wed Oct 28, 2009 8:57 pm
- Location: Yakima, Wa
Re: Quick question on a Regulator for 83' aero 50...
if bear says the aero 80 regulator works...i have one u can get for $10+shipping.
'86 spree
'86 aero50
'83 aero80
'86 aero50
'83 aero80
-
- BMX
- Posts: 26
- Joined: Thu Jun 23, 2011 11:15 pm
- Location: Indiana
Re: Quick question on a Regulator for 83' aero 50...
Thank you for the replies!
@ mbilderb I did note the polarity in the manual and checked both ways. The other side does test fine.
I had hoped it wasn't bad. Good reason why the battery is dead and won't charge though
So, Bear.
Am I understanding correctly that the Aero 80 regulator would work?
If so, fightingplankton, I'll definitely take one .
Thank you very much for your help
Bill
@ mbilderb I did note the polarity in the manual and checked both ways. The other side does test fine.
I had hoped it wasn't bad. Good reason why the battery is dead and won't charge though
So, Bear.
Am I understanding correctly that the Aero 80 regulator would work?
If so, fightingplankton, I'll definitely take one .
Thank you very much for your help
Bill
- fightingplankton
- CB900F
- Posts: 1119
- Joined: Wed Oct 28, 2009 8:57 pm
- Location: Yakima, Wa
Re: Quick question on a Regulator for 83' aero 50...
The 1983 and 1984 Aero 80 works, the 1985 Aero 80 does not.BillMckraken wrote:..............................So, Bear.
Am I understanding correctly that the Aero 80 regulator would work?
If so, fightingplankton, I'll definitely take one .
Thank you very much for your help
Bill
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree