Honda sa50 overheat

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
Tsvarian123
Noob
Noob
Posts: 13
Joined: Thu Sep 29, 2011 10:51 pm
Location: North carolina

Honda sa50 overheat

Post by Tsvarian123 »

Hey guys any way to rig a liquid cooler or make my own for a air cooled bike ??
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Honda sa50 overheat

Post by Trafficjamz »

Tsvarian123 wrote:Hey guys any way to rig a liquid cooler or make my own for a air cooled bike ??
why do you want a water cooled scooter?

do you have a 50cc scooter?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Tsvarian123
Noob
Noob
Posts: 13
Joined: Thu Sep 29, 2011 10:51 pm
Location: North carolina

Re: Honda sa50 overheat

Post by Tsvarian123 »

Have a sa 50 elite Honda 2001 replaced the 50 cc with a 50 mm piston kit and a 78 jet I believe in the carb new racing cdi high output coil and oil pump is zipped open
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Honda sa50 overheat

Post by Trafficjamz »

Tsvarian123 wrote:Have a sa 50 elite Honda 2001 replaced the 50 cc with a 50 mm piston kit and a 78 jet I believe in the carb new racing cdi high output coil and oil pump is zipped open
You need a carb with a replaceable pilot jet not a water cooled bore. :wink:
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Tsvarian123
Noob
Noob
Posts: 13
Joined: Thu Sep 29, 2011 10:51 pm
Location: North carolina

Re: Honda sa50 overheat

Post by Tsvarian123 »

Stock carb but main jet replaced I'm just having a heck of a time it's overheating bad blown 2 heads so far ... Rings were filed down when I opened head and piston was heavily scored and scratched
User avatar
mopro logan
Spree
Spree
Posts: 141
Joined: Thu May 26, 2011 4:52 am
Location: 49660

Re: Honda sa50 overheat

Post by mopro logan »

Trafficjamz wrote:
Tsvarian123 wrote:Have a sa 50 elite Honda 2001 replaced the 50 cc with a 50 mm piston kit and a 78 jet I believe in the carb new racing cdi high output coil and oil pump is zipped open
You need a carb with a replaceable pilot jet not a water cooled bore. :wink:

Trafficjamz is right you need a new carb so you can change both pilot and main jets.
User avatar
dun rite
Board Supporter
Board Supporter
Posts: 709
Joined: Fri Apr 15, 2011 2:07 pm
Location: Naalehu, Hi

Re: Honda sa50 overheat

Post by dun rite »

at least put in a larger main. my 50mm came with a 100. Haven't seen temps over 307 after a long uphill run then stop at stop sign
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
Pancake808
Goped
Goped
Posts: 71
Joined: Sun Sep 12, 2010 3:46 am

Re: Honda sa50 overheat

Post by Pancake808 »

sounds like your gonna need a new bore sooner then later.
Tsvarian123
Noob
Noob
Posts: 13
Joined: Thu Sep 29, 2011 10:51 pm
Location: North carolina

Re: Honda sa50 overheat

Post by Tsvarian123 »

I mean the last time I blew a cylinder it was scored and scratched badly ..
Post Reply