Page 1 of 1
1989 honda elite sb50p carb problem?
Posted: Wed Jan 18, 2012 7:39 pm
by abreen89
I got this honda elite that had a gummed up carb. so i pulled it off got a used one and it was good to go it was running great. But i noticed it was leaking from the carb so i took it off and sprayed some carb clean took out the float and polished the pin put it back together and now i cant even get the it to turn over without spraying either in the carb and even then it only runs for a few second any ideas??? if it helps for me to post pics. of the inside of the carb let me know.
Re: 1989 honda elite sb50p carb problem?
Posted: Wed Jan 18, 2012 7:51 pm
by Bear45-70
Fix it again only this time do it right.
Look here under carbs.
http://hondaspree.net/wiki/index.php5?t ... al_Section
Re: 1989 honda elite sb50p carb problem?
Posted: Wed Jan 18, 2012 7:51 pm
by evilone
knocked some crud loose? Stop using ether.
Re: 1989 honda elite sb50p carb problem?
Posted: Wed Jan 18, 2012 8:48 pm
by bwhigham
There is a great video on youtube from a guy that cleans one of these out...
Here is the link...
http://youtu.be/0sMUAFbtAa4
copy and paste that in your browser,,this is part one of two...watch em both as you go through the steps..
Re: 1989 honda elite sb50p carb problem?
Posted: Thu Jan 19, 2012 12:34 am
by abreen89
bwhigham and bear thanks for sending me that links solved my problem right off the bat had the float pin in incorrect. i appreciate it guys.