Keli vari
Moderator: Moderator
- Elite_FiddyS
- BMX
- Posts: 46
- Joined: Wed Sep 07, 2011 9:59 am
- Location: Merrimack, New Hampshire
Keli vari
put a keli in my 87 se50 along with the stiffer clutch springs. for some reason when both are in and the belt is on the toothed plate infront of the vari doesnt wanna fit on and bolt up nicely am i doing something wrong?
- kingkamehameha
- CB900F
- Posts: 1215
- Joined: Sat Apr 16, 2011 1:11 pm
- Location: kailua kona
Re: Keli vari
Are you using the se50 boss?Elite_FiddyS wrote:put a keli in my 87 se50 along with the stiffer clutch springs. for some reason when both are in and the belt is on the toothed plate infront of the vari doesnt wanna fit on and bolt up nicely am i doing something wrong?
ua mau ke 'ea o ka aina i ka pono o hawaii
Re: Keli vari
Try squeezing the clutch pulleys together so belt drops down, that should give enough slack at the front to get the drive face on.
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
- Elite_FiddyS
- BMX
- Posts: 46
- Joined: Wed Sep 07, 2011 9:59 am
- Location: Merrimack, New Hampshire
Re: Keli vari
If by boss you mean the spacer that goes inside the vari onto the shaft then yes
Re: Keli vari
Did you try what i suggested? It helps a lot getting the drive face over the af05 crank splines. They strip out easy!
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
- Elite_FiddyS
- BMX
- Posts: 46
- Joined: Wed Sep 07, 2011 9:59 am
- Location: Merrimack, New Hampshire
Re: Keli vari
yes man thanks a ton worked perfectly!evilone wrote:Did you try what i suggested? It helps a lot getting the drive face over the af05 crank splines. They strip out easy!