Hooking up engine tachometer for tuning?
Moderator: Moderator
Hooking up engine tachometer for tuning?
My engine tach only has provisions for 8, 6, and 4 cylinders. If I select the 4, should I divide the reading by 4 to get the correct rpms? Just wondering because the manual says to attach a tachometer and I've never seen a 1 cylinder tach before.
- Tippmann98
- Spree
- Posts: 283
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Lex, Ky.
- Contact:
- Jamie_Miles
- Goped
- Posts: 61
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Suwanee, GA
- Contact:
You can get a 1 cyl. tach for a race kart. Their kinda expensive as mentioned.
MyChron (http://aimsports.com) and Digatron (http://digatron.cc) make good ones. They can read your engine temp and everything.
The tach you get also depends on if your engine is a 2 stroke or 4 stroke, not just the # of cylinders.
MyChron (http://aimsports.com) and Digatron (http://digatron.cc) make good ones. They can read your engine temp and everything.
The tach you get also depends on if your engine is a 2 stroke or 4 stroke, not just the # of cylinders.
Comeing soon: Possibly the fastest Spree in the world...
tach
don't u think that the tachs are a little pricey