thekingof7 wrote:You seem to like pushing part sales. Just an observation.
thekingof7 wrote:Hey fellas, another stupid question from thekingof7. I keep having an issue with the tube(boot) going from the airbox to the carb has no flex to it and pops right off during standard riding.
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
thekingof7 wrote:You seem to like pushing part sales. Just an observation.
thekingof7 wrote:Hey fellas, another stupid question from thekingof7. I keep having an issue with the tube(boot) going from the airbox to the carb has no flex to it and pops right off during standard riding.
...and there's an engine rebuild waiting to be done. "Ghetto rig at your own peril"
thekingof7 wrote:You seem to like pushing part sales. Just an observation.
thekingof7 wrote:Hey fellas, another stupid question from thekingof7. I keep having an issue with the tube(boot) going from the airbox to the carb has no flex to it and pops right off during standard riding.
Well considering that I am using an OEM part and the issue was resolved by using a non standard clamp, I'd say my ghetto rigging was quite successful. The flex in most old rubber tubing is lacking much of the time. I thought his solution was a good one, provided he ensures an absolute seal. And yes, I have seen a bit of part pushing on this site, rather than encouragement for trying to find new ways to solve a problem on an old scoot. Its like dealing with the "Emily" table in middle school with some of you guys.
I guess we have different views of parts pushing. Why not replace with OEM if another member has the part and would probably just give it to you. Instead you want to call someone out...come on Emily! JK
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
evilone wrote:I guess we have different views of parts pushing. Why not replace with OEM if another member has the part and would probably just give it to you. Instead you want to call someone out...come on Emily! JK
Put on the air filter and carb to air filter hose.
Only question I have now is what size bolts do I need to put the fan cover on?
Also I picked up a parts scooter and it had air box lid.
Check out all of my projects: http://theprojectboy.tumblr.com/
____________________________________________________________ '07 Honda Ruckus '86 Honda Spree NQ50 Honda Spree NQ50 Honda Elite E SB50P Honda Urban Express
shadow7117 wrote:Some parts came in the mail so put them on.
Here is the engine fan.
Put on the air filter and carb to air filter hose.
Only question I have now is what size bolts do I need to put the fan cover on?
Also I picked up a parts scooter and it had air box lid.
glad to see you got the parts i sent you
Yes thank you very for selling them. They shipped fast and you packed it up really good.
Check out all of my projects: http://theprojectboy.tumblr.com/
____________________________________________________________ '07 Honda Ruckus '86 Honda Spree NQ50 Honda Spree NQ50 Honda Elite E SB50P Honda Urban Express
is that liquid gasket on your exhust?? i would recomend getting the stock gasket from you dealer they are cheap and something the gets that hot is risky to use anything else on.
shadow7117 wrote:
Only question I have now is what size bolts do I need to put the fan cover on?
Also I picked up a parts scooter and it had air box lid.
Use short bolts Metric 6mm IIRC
Does your parts bike have the fan shroud? you will need one of those too.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
abreen89 wrote:is that liquid gasket on your exhust?? i would recomend getting the stock gasket from you dealer they are cheap and something the gets that hot is risky to use anything else on.
Yes it is that is just how it came when I bought it. The parts scooter I bought should have the gasket. Thanks for reminding me about that, good eye.
Check out all of my projects: http://theprojectboy.tumblr.com/
____________________________________________________________ '07 Honda Ruckus '86 Honda Spree NQ50 Honda Spree NQ50 Honda Elite E SB50P Honda Urban Express
shadow7117 wrote:
Only question I have now is what size bolts do I need to put the fan cover on?
Also I picked up a parts scooter and it had air box lid.
Use short bolts Metric 6mm IIRC
Does your parts bike have the fan shroud? you will need one of those too.
Thanks for the info on the bolt size. I don't think the other scooter has a fan shroud but that looks like something I could make. What material is it made out of?
Check out all of my projects: http://theprojectboy.tumblr.com/
____________________________________________________________ '07 Honda Ruckus '86 Honda Spree NQ50 Honda Spree NQ50 Honda Elite E SB50P Honda Urban Express
shadow7117 wrote: I don't think the other scooter has a fan shroud but that looks like something I could make. What material is it made out of?
Availability of shrouds is pretty easy and surely not very expensive, not that I have priced them. I would not have looked at the shrouds and thought, "gee, i can make those", but if you are equipped for such a task, then you might save $10 or $20...