i cant for some reason get a picture small enough to load it on this form. i have posted pictures in another honda aero forms that will let me upload pictures
http://www.aeroriders.proboards.com/ind ... 248&page=1
if you did click on the link above and saw the pictures at the bottom. what would cause this?
84 aero50 blown gaskget
Moderator: Moderator
84 aero50 blown gaskget
84 Aero af05e Ruckus variator, rear metro wheel, Leovince pipe ( work in process... porting , nh80 reeds intake carb)
-
SuprasNsprees
- Elite
- Posts: 564
- Joined: Mon Jun 20, 2011 2:05 pm
- Location: saint louis
- Contact:
Re: 84 aero50 blown gaskget
interesting
the only head gasket ive seen destroyed on a scooter/ped was from head bolts that had come loose.
with situation like this (cyl pressures), a small leak turns into a major leak quickly
the only head gasket ive seen destroyed on a scooter/ped was from head bolts that had come loose.
with situation like this (cyl pressures), a small leak turns into a major leak quickly
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
Re: 84 aero50 blown gaskget
okay i figured out how to re size the pictures
- Attachments
-
- photo (1).JPG (24.77 KiB) Viewed 2338 times
-
- photo.JPG (17.95 KiB) Viewed 2338 times
84 Aero af05e Ruckus variator, rear metro wheel, Leovince pipe ( work in process... porting , nh80 reeds intake carb)
Re: 84 aero50 blown gaskget
I agree with SuprasNsprees. Head bolts loose. Check for damaged surfaces the gasket seats on.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree