Honda Spree and Elite 50 Forums

hello i am new to the game i am looking for any info on big bore kit s for a nq-50 is there any or will i have to bore the cylinder and put a bigger piston in i know my options are limited becuse of the 10mm conecting pin i also thank you folks for the belt information it wiill go uphills a lot better now i will put about 20 miles on the belt before i try the hill of death love my spree i just do not like to pushin up a hill lol stock 86 spree 1300 on the speedo unrestricted exhaust de carbond but still stock afermarket cdi box high output coil and if can i put a bigger jet in i am running a 65 think it might be littl lean but i put a little oil in with the gas run ssupream and use bel-ray minral oil or is there somthing better thank you the newbee i can get up to 27 to 28 mph better then 25 when i got it i still cant reach the magic 30 but i have ma40 down hill graphite 9 is going to hook me up with a sb reed and a ported manifold

tazland sells bbk for the spree he is currently out of stock but said he would have more in a month or so. His are 48mm bbk. AS for a jet change i would do a plug chop too check and see if you are running right. I us honda GN2 oil and it has been really good to me its 6$ a quart and can be bought at any dealer. But thats just My opinion.

What year Spree? The '84 and '85 will normally not do 30 mph.

1986
85 pound scooter 240 pound man

i will buy my next oil from honda but it is very hard to walk past the brand new scooters knowing i can buy one without any pain .on my way to the parts counter could you explain a plug chop

wikispreedia.com does a pretty good job heres the link.

http://hondaspree.net/wiki/index.php5?t ... Plug_Chops

wikispreedia.com does a pretty good job heres the link.

http://hondaspree.net/wiki/index.php5?t ... Plug_Chops

abreen89 wrote:wikispreedia.com does a pretty good job heres the link.

http://hondaspree.net/wiki/index.php5?t ... Plug_Chops

i have used this ver informitive web site

abreen89 wrote:tazland sells bbk for the spree he is currently out of stock but said he would have more in a month or so. His are 48mm bbk. AS for a jet change i would do a plug chop too check and see if you are running right. I us honda GN2 oil and it has been really good to me its 6$ a quart and can be bought at any dealer. But thats just My opinion.

i was at the HONDA DEALER AND THEY STILL HAVE SB 50 REED VALVE 14100-GS6-010 FOR THE SPREE Ii would not have known if you did not promped me to get factory oil thank you the new bee

Glad to hear it

That part is discontinued. Evidently the dealer had them in stock.

abreen89 wrote:Glad to hear it

yes a was to the dealer said they take a week to get and they are pre pay but they are brand new and and almost imposible for the newbees to find i call my self a newbee becuse i never had to take it apart before it is a honda

Might be worth picking up a couple then

abreen89 wrote:Might be worth picking up a couple then

yes i agree