JDM '85 Aero head set conversion.

[SpamMusubi4Life]

Ok so I purchased a JDM head set for my Aero. All the plastic pieces are a match except for the wiring harness. Tried switching around the wires on the plugs to match the American harness, got the horn, blinkers, dash light, and gas works. Only problem I have is getting the electric starter to function.
Pleeease if any body has done this conversion, let me know. and didn't cut or splice any wires, trynna just make it plug n play and keep from cutting any wires. HELP!!

[SpamMusubi4Life]

I thinks its called a Tact 50??

[devenex]

Looks nice, good luck! Make sure to post some pics of it installed too.

[SpamMusubi4Life]

Thanks man. Well made some progress....kinda. starter now works, but it also works without the key in the ignition. And now gas gauge is always full or empty. Any help?

[SpamMusubi4Life]

Ok now I'm s*** outta luck. Now the only thing that works is the left side of the handle bars. Hi low beam, blinkers, and horn. The dash light isn't on anymore, the kill switch doesn't work, and the starter quit too. I even plugged in the American components back in and they don't work either. My brake doesn't light up when I squeeze the brakes either. *.

[zuphilius]

Fuse? Smoked a wire?

[SpamMusubi4Life]

I only know of the one fuse by the battery. Anymore? Nah I didn't smoke any wires. I think.

[SpamMusubi4Life]

And he fuse by the battery is still good.

[martynkim]

Check your ground.

[SpamMusubi4Life]

I've been checking it for the past 2hours. I'm gonna take it down to a buddy o mine, he farts around with electricals more than I do.