CT Manifold

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
DaylightDies
Spree
Spree
Posts: 161
Joined: Mon Aug 24, 2009 10:18 am
Location: Kadena ABS, Okinawa Prefecture, Japan

CT Manifold

Post by DaylightDies » Sun Aug 19, 2012 11:04 pm

The CT intake manifold is typically for bigger carbs, 24mm+ but I want to use it with a small Carb. is there a way to make the Carb output bigger? or to make the intake smaller?
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50

User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9666
Joined: Mon Jul 23, 1973 10:24 am
Location: Union, WA.

Re: CT Manifold

Post by Bear45-70 » Sun Aug 19, 2012 11:28 pm

DaylightDies wrote:The CT intake manifold is typically for bigger carbs, 24mm+ but I want to use it with a small Carb. is there a way to make the Carb output bigger? or to make the intake smaller?
Where did you get that idea? It will work with anything you want to mount on it, even a stock carb.

Here is a CT with an 18mm carb off an Aero 125 for my 1985 Aero 50 with a mini BBK (43mm).

Image
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree

DaylightDies
Spree
Spree
Posts: 161
Joined: Mon Aug 24, 2009 10:18 am
Location: Kadena ABS, Okinawa Prefecture, Japan

Re: CT Manifold

Post by DaylightDies » Mon Aug 20, 2012 12:10 am

=-O I didn't know they can tighten down that much. Thank you bear!
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50

veedubh20
CB900F
CB900F
Posts: 2013
Joined: Sat Dec 31, 2005 7:00 pm
Location: Honolulu paradise island

Re: CT Manifold

Post by veedubh20 » Mon Aug 20, 2012 12:12 am

jog dont need pwk21-28mm carb. suck more petrol fuel and make more noise! :lol:

dellorto phbg carb is good enough.

my jog dont have problem and start 1 kick always ran 12mm carb on polini bore.


im sure the pe/pwk carb will rub the main frame, not much room for run airbox.
Last edited by veedubh20 on Mon Aug 20, 2012 12:16 am, edited 1 time in total.

User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9666
Joined: Mon Jul 23, 1973 10:24 am
Location: Union, WA.

Re: CT Manifold

Post by Bear45-70 » Mon Aug 20, 2012 12:15 am

DaylightDies wrote:=-O I didn't know they can tighten down that much. .......................
What does tighten down mean?
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree

DaylightDies
Spree
Spree
Posts: 161
Joined: Mon Aug 24, 2009 10:18 am
Location: Kadena ABS, Okinawa Prefecture, Japan

Re: CT Manifold

Post by DaylightDies » Mon Aug 20, 2012 12:21 am

The hose clamps on the intake of the manifold. @veedubh 12mm is kind of small and it is very hot here I think 17.5mm is the smallest ill go on a bbk.
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50

User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9666
Joined: Mon Jul 23, 1973 10:24 am
Location: Union, WA.

Re: CT Manifold

Post by Bear45-70 » Mon Aug 20, 2012 12:25 am

DaylightDies wrote:The hose clamps on the intake of the manifold. @veedubh 12mm is kind of small and it is very hot here I think 17.5mm is the smallest ill go on a bbk.
No, you can't tighten the hose clamp extra, beside the smaller carb has to bolt up to something, so you have an adapter made. Look closely at my pic and you will see the carb bolted to the adapter that plugs into the rubber.
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree

DaylightDies
Spree
Spree
Posts: 161
Joined: Mon Aug 24, 2009 10:18 am
Location: Kadena ABS, Okinawa Prefecture, Japan

Re: CT Manifold

Post by DaylightDies » Mon Aug 20, 2012 1:33 am

ahhh I see, what if my Carb doesn't have the flange like yours does?
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50

veedubh20
CB900F
CB900F
Posts: 2013
Joined: Sat Dec 31, 2005 7:00 pm
Location: Honolulu paradise island

Re: CT Manifold

Post by veedubh20 » Mon Aug 20, 2012 2:00 am

the bws 100 is 16mm teikei carb is 16mm.

all the jog carb 12,14,16mm on the rear carb inlet pipe of a carb is 18mm. ( not talking about the outside pipe mount).

User avatar
Mystic
CB900F
CB900F
Posts: 2583
Joined: Sat May 14, 2011 8:56 pm
Location: Guys, Tennessee

Re: CT Manifold

Post by Mystic » Mon Aug 20, 2012 7:47 am

you can get a 17.5mm dellorto cloned carb for around 30 bucks :D
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged :D
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma

DaylightDies
Spree
Spree
Posts: 161
Joined: Mon Aug 24, 2009 10:18 am
Location: Kadena ABS, Okinawa Prefecture, Japan

Re: CT Manifold

Post by DaylightDies » Mon Aug 20, 2012 9:06 am

Mystic wrote:you can get a 17.5mm dellorto cloned carb for around 30 bucks :D
:O PM pls!
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50

User avatar
Downsouthdio
CB900F
CB900F
Posts: 1205
Joined: Wed Dec 21, 2011 11:00 am
Location: Key west

Re: CT Manifold

Post by Downsouthdio » Mon Aug 20, 2012 10:46 am

Arreche 17.5 or 19mm,
Honda super dio
Corsa
26mm
Sparrow

DaylightDies
Spree
Spree
Posts: 161
Joined: Mon Aug 24, 2009 10:18 am
Location: Kadena ABS, Okinawa Prefecture, Japan

Re: CT Manifold

Post by DaylightDies » Mon Aug 20, 2012 10:52 am

Downsouthdio wrote:Arreche 17.5 or 19mm,
I liked my 19mm Arreche on my Jog in the states. I would like to get a 17.5mm Arreche.
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50

Post Reply