emulsion tube installation

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
mauricio328
Noob
Noob
Posts: 17
Joined: Sun Aug 26, 2012 9:45 am
Location: United States

emulsion tube installation

Post by mauricio328 »

So I cleaned my carb on my 1986 spree and I don't know where the ports are supposed to face on the emulsion tube. Anyone know where I can find this information.
abreen89
CB900F
CB900F
Posts: 1324
Joined: Wed Jan 18, 2012 7:32 pm
Location: Graham,WA
Contact:

Re: emulsion tube installation

Post by abreen89 »

mauricio328 wrote:So I cleaned my carb on my 1986 spree and I don't know where the ports are supposed to face on the emulsion tube. Anyone know where I can find this information.
the ports? just drop it in the hole and replace the jet..you want it so stick down so you should beableto see it hanging down when you look through the intake hold.
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works ;)
'86 Honda Aero NB50 Stock
User avatar
motomech
Goped
Goped
Posts: 62
Joined: Thu Jan 07, 2010 6:07 pm

Re: emulsion tube installation

Post by motomech »

Isn't there a notch that locates the tube?
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2899
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: emulsion tube installation

Post by martynkim »

motomech wrote:Isn't there a notch that locates the tube?

No :*:
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
User avatar
Pete M
Elite
Elite
Posts: 364
Joined: Fri Oct 14, 2011 5:18 pm
Location: Daytona, Florida

Re: emulsion tube installation

Post by Pete M »

89 Elite E
mousewheels
Veteran OG
Veteran OG
Posts: 3639
Joined: Tue May 22, 2007 8:10 pm
Location: North of Seattle, WA

Re: emulsion tube installation

Post by mousewheels »

+2 - For our scooter carbs - there is no required rotation orientation, or locating aids.

Image
Post Reply