Page 1 of 1
emulsion tube installation
Posted: Tue Sep 11, 2012 12:43 am
by mauricio328
So I cleaned my carb on my 1986 spree and I don't know where the ports are supposed to face on the emulsion tube. Anyone know where I can find this information.
Re: emulsion tube installation
Posted: Tue Sep 11, 2012 1:20 am
by abreen89
mauricio328 wrote:So I cleaned my carb on my 1986 spree and I don't know where the ports are supposed to face on the emulsion tube. Anyone know where I can find this information.
the ports? just drop it in the hole and replace the jet..you want it so stick down so you should beableto see it hanging down when you look through the intake hold.
Re: emulsion tube installation
Posted: Wed Sep 12, 2012 5:42 pm
by motomech
Isn't there a notch that locates the tube?
Re: emulsion tube installation
Posted: Wed Sep 12, 2012 8:09 pm
by martynkim
motomech wrote:Isn't there a notch that locates the tube?
No
Re: emulsion tube installation
Posted: Wed Sep 12, 2012 8:30 pm
by Pete M
Re: emulsion tube installation
Posted: Wed Sep 12, 2012 11:56 pm
by mousewheels
+2 - For our scooter carbs - there is no required rotation orientation, or locating aids.
