Spree revs out on start up
Moderator: Moderator
-
- Noob
- Posts: 15
- Joined: Mon Apr 18, 2011 12:08 pm
- Location: michigan
Spree revs out on start up
So I just rebuilt a 1985 spree new rings and piston and put everything back together went to fire it up and she roared..... Except it just revs out! So I killed it and re adjusted the carb and it did the same thing....so then I thought it was in my throttle cable ...nothing looked out of the norm and it did it again....could it be my carb? Did I do something wrong?? Any help is appreciated thanks
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Spree revs out on start up
Pull the hose off of the carb and look in at the slide operation. If you diddnt pull the slide already, pull it and put it back in, it could be jammed up but look fine. When you are setting the idle speed make sure to blip the throttle so the screw doesn't jam the slide up. How did you tune the carb, to manual spec? Double check the air box as well. Air filter condition ?
Sent from my Nexus 7 using Tapatalk 2
Sent from my Nexus 7 using Tapatalk 2
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock