1994 honda elite SA50P Bogging down when throttle applied

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: 1994 honda elite SA50P Bogging down when throttle applie

Post by swimmingfree »

what was the top speed when you did it???
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
Mystic
CB900F
CB900F
Posts: 2584
Joined: Sat May 14, 2011 8:56 pm
Location: Guys, Tennessee

Re: 1994 honda elite SA50P Bogging down when throttle applie

Post by Mystic »

order air filter dom Honda and it comes pre oiled just pop it in. order a cheap bystarter for Chinese gy6 off bay for around 8 bucks. if it ran good with the exhaust off and the plug is wet when you take it out and it starts easy then I figure your bystarter isn't working properly. generally if it cranks the coil and cdi are good otherwise no spark or weak spark. waste of money to buy that cheap cdi
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged :D
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
User avatar
Mystic
CB900F
CB900F
Posts: 2584
Joined: Sat May 14, 2011 8:56 pm
Location: Guys, Tennessee

Re: 1994 honda elite SA50P Bogging down when throttle applie

Post by Mystic »

while it is running pull the vacuum line off the intake manifold for a secondand rev it up and see if it is still as bubbly. if it's rich gom bystarter it should run a little better with more air like when you ran it without exhaust it was sucking ai in the cylinder instead of reusing the extra fuel that is pushed into the exhaust. --- also throw that spark plug away and get an NGK bpr6hs only costs like 1.99 at oreily auto parts
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged :D
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
JStok
BMX
BMX
Posts: 20
Joined: Sat Apr 20, 2013 8:11 am
Location: New Hampshire

Re: 1994 honda elite SA50P Bogging down when throttle applie

Post by JStok »

The top speed was probably 20 but the throttle was not completely open
Yeah I will order the bystarter and I definitely need a new air filter. Is there anyway I can bypass the bystarter for now while it is warmed up?
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: 1994 honda elite SA50P Bogging down when throttle applie

Post by swimmingfree »

are you going clean the pipe???
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
JStok
BMX
BMX
Posts: 20
Joined: Sat Apr 20, 2013 8:11 am
Location: New Hampshire

Re: 1994 honda elite SA50P Bogging down when throttle applie

Post by JStok »

Half a year ago I got it red hot with a propane torch (with it off, of course) and it did not make a difference. I may try to clean it out chemically
JStok
BMX
BMX
Posts: 20
Joined: Sat Apr 20, 2013 8:11 am
Location: New Hampshire

Re: 1994 honda elite SA50P Bogging down when throttle applie

Post by JStok »

Yeah I took the line off of the intake manifold and it did not bubble.
Is there anything else I could try while the air filter and bystarter are being ordered? Is there anyway I go around the bystarter to get it running well?
JStok
BMX
BMX
Posts: 20
Joined: Sat Apr 20, 2013 8:11 am
Location: New Hampshire

Re: 1994 honda elite SA50P Bogging down when throttle applie

Post by JStok »

Well, turns out it was the lean mixture and too much air that was the problem. I started it up, took the air filter and air box cover off, and while booting it, I put my fingers in front of where the air was being drawn in and the engine started to climb and run well. Of course, I cannot keep my fingers there while driving so I going to need to get an air filter.
Post Reply