Quick question regarding 2000 honda elite sr brake pad sizes

[okrueger183]

Just curious if anyone knows the correct brake pads I should buy for my 2000 Honda elite sr. By size, I mean the model and hole spacing. The link below has some options.

http://www.monsterscooterparts.com/scoo ... -pads.html

I want to order the parts and have them ready before I take apart my scoot, but I can't find anywhere the correct size of pads.

Here's another link with the service manual for the scoot. I scoured it but can't seem to find any brake pad sizes.

http://www.motorscooterguide.net/Manual ... Manual.pdf

If anyone knows, or coud help me find this out that would be great. I'm looking for front and rear brake pads.

Thanks in advance.

[patthesoundguy]

Two choices for the aftermarket shoes from ebc. Grooved or not.
EBC 333 or EBC 333G G means grooved obviously
http://www.cheapcycleparts.com/products ... rake-shoes

http://www.cheapcycleparts.com/products ... rake-shoes

Here is the link to all of the part numbers you could want

http://www.cheapcycleparts.com/scooter/ ... FOEM+Parts
Your local dealer can prob. order the shoes for your scoot pretty easy, my Honda deal gets me ebc shoes for my Hondas out of their aftermarket catalogs in a week. That is if you don't want to order online.

Sent from my Nexus 7 using Tapatalk 2

[okrueger183]

Awesome, thanks so much.

[johnny248]

Does anyone have any experience with the 333G ? I just put a set on my scoot. Haven't used them yet, but I've used EBC stuff in the past and they have always been gokd. Can't really go wrong for less than $20 I guess. I was looking at the more expensive Malossi shoes, which I am sure are good also, but some people have said they dont work that well unless they are hot. I'm sure they use a higher temp friction material. Not sure if it is ideally suited for normal street use.