Page 1 of 1
exhaust not seating down.
Posted: Wed Oct 02, 2013 5:02 pm
by Dingus Khan
not sure if the wrong bolt in the on head. theres an air leak as big as the spacer on the top bolt. if this is not the right bolt how do I get it out and where do I find a new one. all I need to do now before I can start it up.
Re: exhaust not seating down.
Posted: Wed Oct 02, 2013 5:26 pm
by LMH
You can grind out the ear for the exhaust pipe, its not much it looks like.
Re: exhaust not seating down.
Posted: Wed Oct 02, 2013 5:29 pm
by martynkim
Dremel time
Re: exhaust not seating down.
Posted: Wed Oct 02, 2013 5:39 pm
by Dingus Khan
dang it lent mine out and they burned it up and no mention of it since..... gonna go get one tonight
Re: exhaust not seating down.
Posted: Wed Oct 02, 2013 6:46 pm
by Dingus Khan
Done. Almost ordered a new jug lol.
Re: exhaust not seating down.
Posted: Wed Oct 02, 2013 11:40 pm
by Dingus Khan
I got it to seat. Sanded down like 1-2mm and it went right in. I think it was a little * and i hammed up the eyelet.
Re: exhaust not seating down.
Posted: Wed Oct 02, 2013 11:41 pm
by Dingus Khan
C.0ck.eyed*
Re: exhaust not seating down.
Posted: Thu Oct 03, 2013 1:09 am
by paulpauly7
just remove it and fit new studs .Or remove and use some 6mm bolts
