Hey guys i recently bought a nifty fifty of my mate and its seen better days
my plans are to tidy up as much as i can and maybe hot up the motor a little.
so i have made it my side project, i have stripped it down completely (apart from the motor) and found that the frame was split almost completely in half just above where the motor/rear wheel pivots. so i've since welded it up and painted the frame.
i've done a little reading and mines a 1986 with the round headlight (not the usdm/canada spec one)
I'll upload some pictures soon
i have a few questions if anyone can help me out.
1 where is the best place to buy body covers (if you can buy them)?
2 will the body covers (apart from the 2 handle bar covers) from a usdm/canada one be the same as my jdm/nzdm ones?
any help would be much appreciated
Thanks
My Nifty 50 tidy up from nz
Moderator: Moderator
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: My Nifty 50 tidy up from nz
Hi where in NZ are you ? If chch did you buy it from Bart ? im me ill give you my cell number i have some spare panels somewhere .
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: My Nifty 50 tidy up from nz
Hi no I'm from hamilton. That would be great! my celll is telecom 470 4773