Gates or Bando belt?

qaz · Post by **qaz** » Mon Jun 09, 2014 11:04 am

I put a new belt on my 1999 SA50. The belt was a Gates belt made in China 641x15.5x30, in about a month it had torn several cog off the belt. What would cause this and are the Gates belts made in the USA a better quality? Is it worth trying another Gates belt with Kevlar, or go back to the Bando.

LMH · Post by **LMH** » Mon Jun 09, 2014 1:09 pm

Go with OEM Bando.

paulpauly7 · Post by **paulpauly7** » Mon Jun 09, 2014 2:03 pm

or the malossi kevlar belt

qaz · Post by **qaz** » Mon Jun 09, 2014 2:39 pm

Is there anything wrong with the gates belts?

LMH · Post by **LMH** » Mon Jun 09, 2014 4:42 pm

They just dont last long as you saw.

patthesoundguy · Post by **patthesoundguy** » Mon Jun 09, 2014 5:53 pm

Bando has been proven to be super durable. How else would belts last 30 years and still be in decent working order. Honda uses bando for a reason for figure.

qaz · Post by **qaz** » Tue Jun 10, 2014 10:57 am

Has anyone had any experience with the Gates brand belts? If not, what brand do most buy around here and why?

LMH · Post by **LMH** » Tue Jun 10, 2014 10:59 am

Read above.

patthesoundguy · Post by **patthesoundguy** » Tue Jun 10, 2014 4:41 pm

I have some gates belts for testing purposes for stock replacement for belts that aren't available they aren't power sport specific belts and I havent had any time on them yet so I can't say how they hold up to the banco, all I know is I have near 8000km on a 1984 stock banco belt and its still good. And I have over 5000km on another 1985 banco belt and still going. My friend with a 85 aero like mine has over 8000 on her stock banco belt. See a pattern here

the bando belts work so well nobody really thinks about changing to anything else unless its a special specific racing application belt like the malossi belt pauly mentioned. The gates belts may be perfectly fine but the only way to know is to try it out an see.

qaz · Post by **qaz** » Wed Jun 11, 2014 6:45 am

Thanks, after some thought, I will just stick with the original Bando belt.

thekingof7 · Post by **thekingof7** » Fri Jun 13, 2014 3:16 pm

Good choice, my gates belt lost power after about 2 months. Wish I had stuck OEM Bando.

ped · Post by **ped** » Fri Jun 13, 2014 3:23 pm

What about polini or bando?

Red Eft Performance · Post by **Red Eft Performance** » Fri Jun 13, 2014 5:24 pm

The Malossi Kevlar belt is hard to beat. I supply a couple of racers with these and they request them for a reason.

Keith

ped · Post by **ped** » Fri Jun 13, 2014 6:39 pm

Red Eft Performance wrote:The Malossi Kevlar belt is hard to beat. I supply a couple of racers with these and they request them for a reason.

Keith

yes the malossi Kevlar belt is best choice.
but I have a new polini and new bando belt. just asking which ones better from the two? thanks

Red Eft Performance · Post by **Red Eft Performance** » Fri Jun 13, 2014 7:07 pm

ped wrote:
Red Eft Performance wrote:The Malossi Kevlar belt is hard to beat. I supply a couple of racers with these and they request them for a reason.

Keith
yes the malossi Kevlar belt is best choice.
but I have a new polini and new bando belt. just asking which ones better from the two? thanks

The Polini and the Bando are both good belts. The Polini might grab a little better but it is hard to tell.

Honda Spree and Elite 50 Forums

Gates or Bando belt?

Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?

Re: Gates or Bando belt?