Spree Big Bore Kit

[btosi]

I purchased a Spree big bore kit on Ebay from chopchop123. The kit comes with two base gaskets, is one a spare?

Thanks

[motormike]

I think you are supposed to use BOTH base gaskets.
The seller is a member here as well...he is tazland001
I am surprised there is not instructions pertaining to this issue.
Some of the other members know about this...someone will speak up, surely.
Send a pm to tazland001 in the meantime, or go back to eBay and ask him...

[btosi]

Thanks Motormike, that was sort of what I was thinking. I should have stated that I had not received the kit yet and was looking at the picture on ebay. I'm sure there will be some instructions included.

Thanks Again

[patthesoundguy]

The second gasket is to shim the cylinder to get the piston not to contact the head you may or may not need it. There should be an instruction sheet in the box. Follow those instructions to the letter for break in and for installation and you will have a happy bbkit

[Rip_City_Spree]

after just reading the Polini instructions. I can only imagine what the tiawan instructions look like

[ped]

I sell these kits, and I never use the second gasket. I'm personally running one on my bike, runs awesome. Also, there are never directions with the tiawan bores. The polini ones are hard enough to understand. I can see the tiawan directions now

1: add faucet connection to locomotive hole
2 slide pipe over happy shaft
3 enjoy off road excite.

[patthesoundguy]

taz includes his own instructions with his kits, or he used to anyway.