oko air box

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
solid808
Spree
Spree
Posts: 109
Joined: Sun Feb 08, 2015 10:36 pm
Location: Honolulu

oko air box

Post by solid808 »

question about airbox... does it hurt performance.... I'm running a uni filter but want to run the oko air box because of the stock look.. they say need to lean out air screw or or down jet to run.. it causes less air in turn less power... can't be that bad right?
2006 SYM DD50
72 Corsa
Mini Stroked
26mm Polini carb
Stage 6 intake manifold
Sparrow Exhaust
Polini Ruckus Variator
Malossi Fly Clutch w/ blue
1500 contra
Lightened mag
7.4-1 gears
solid808
Spree
Spree
Posts: 109
Joined: Sun Feb 08, 2015 10:36 pm
Location: Honolulu

Re: oko air box

Post by solid808 »

or if someone can point me in the direction of another airbox that wont break the bank if you know what I mean
2006 SYM DD50
72 Corsa
Mini Stroked
26mm Polini carb
Stage 6 intake manifold
Sparrow Exhaust
Polini Ruckus Variator
Malossi Fly Clutch w/ blue
1500 contra
Lightened mag
7.4-1 gears
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: oko air box

Post by swimmingfree »

you need to post more info like cc , carb size and pipe ...
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
curtis966
Elite
Elite
Posts: 833
Joined: Sat May 26, 2012 10:52 pm
Location: michigan

Re: oko air box

Post by curtis966 »

More then one members have done over 70mph using the oko air box so I don't think it hurts performance. It will be slightly different jetting then a uni filter as it's not quite as free flowing.
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
User avatar
cruzingratiot
Elite
Elite
Posts: 409
Joined: Mon Jun 17, 2013 1:24 am
Location: Detroit michigan , 2000 Purple elite s ,2001 Black elite s ,

Re: oko air box

Post by cruzingratiot »

solid808 wrote:question about airbox... does it hurt performance.... I'm running a uni filter but want to run the oko air box because of the stock look.. they say need to lean out air screw or or down jet to run.. it causes less air in turn less power... can't be that bad right?
I heard it is called a ( kuka airbox )
and there is one called a ( ddx airbox ) with only one slit on the bottom
which I heard is really hard to find

I personally don't see any ill effect on performance with it

Image
Donate Life
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You

My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11321
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: oko air box

Post by Wheelman-111 »

Greetings:

That whole box is open on the outside. The thin foam doesn't restrict much, and it has about the same surface area, so I personally think it flows at least as well as a UNI. It also has that short (and short-Lived...) connector pipe that acts as a velocity stack. Flash had some other changes, but got its best 71+ MPH shortly after that OKO box was installed. It's tricky to fit however. I heat-gunned the grommet section to give it a little angle on 2 planes. This allowed me to line up the connector pipe to the carb mouth with the box securely bolted with a spacer to the crankcase. See somewhere in the Flash 6 thread.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
solid808
Spree
Spree
Posts: 109
Joined: Sun Feb 08, 2015 10:36 pm
Location: Honolulu

Re: oko air box

Post by solid808 »

Wheelman-111 wrote:Greetings:

That whole box is open on the outside. The thin foam doesn't restrict much, and it has about the same surface area, so I personally think it flows at least as well as a UNI. It also has that short (and short-Lived...) connector pipe that acts as a velocity stack. Flash had some other changes, but got its best 71+ MPH shortly after that OKO box was installed. It's tricky to fit however. I heat-gunned the grommet section to give it a little angle on 2 planes. This allowed me to line up the connector pipe to the carb mouth with the box securely bolted with a spacer to the crankcase. See somewhere in the Flash 6 thread.
I put it on today... It is louder then my uni filter... Looks better but way louder ... even idle seems louder ... It is like its echoing the sound of the carb ... Might put my uni filter back on lol
2006 SYM DD50
72 Corsa
Mini Stroked
26mm Polini carb
Stage 6 intake manifold
Sparrow Exhaust
Polini Ruckus Variator
Malossi Fly Clutch w/ blue
1500 contra
Lightened mag
7.4-1 gears
Post Reply