Wire guage?
Moderator: Moderator
-
- Board Supporter
- Posts: 772
- Joined: Fri Feb 28, 2014 6:35 am
- Location: Tennessee
Wire guage?
I need to buy some connectors for some trimming to a harness. Anyone know the right size guage connectors to get? It's for an aero 80 scooter it appeared to be the same diameter as a spree harness I have compared it to.
Re: Wire guage?
I think for the most part, the size for 14 ga. wire will be acceptable.
Heavier gauge for wires from battery to solenoid and ground.
Heavier gauge for wires from battery to solenoid and ground.
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Wire guage?
I agree with Mike not much on an aero 80 that 14 gauge won't cover. I have a feeling that the majority of the harness is 18 gauge so 14 or 16 gauge will be totally safe. 12 gauge or 10 gauge would be fine for battery and ground I think.motormike wrote:I think for the most part, the size for 14 ga. wire will be acceptable.
Heavier gauge for wires from battery to solenoid and ground.
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock