AF05 87' Elite SE50 question.
Moderator: Moderator
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: AF05 87' Elite SE50 question.
Here's a photo of my SE50 with a Leo Vince.
- Attachments
-
- scooter.jpg (125.47 KiB) Viewed 5304 times
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
-
- Elite
- Posts: 331
- Joined: Mon Feb 01, 2016 11:57 pm
- Location: Florida
Re: AF05 87' Elite SE50 question.
Thanks for the pic! Is that pipe better for stockish engines or modified? I have a SSS Slick Willy on my SE50 I really like.
-
- Elite
- Posts: 392
- Joined: Mon Feb 01, 2016 11:04 pm
- Location: beaverton, or
Re: AF05 87' Elite SE50 question.
Benji, link him that polini ebay pipe u posted on meatball's thread.
2000 Honda SR (purple swurp)
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
Re: AF05 87' Elite SE50 question.
Already gone. If you look you can find plenty of pipes for these motors. There all out there somewhere. That polini pipe is actually designed for a specific bore, so it's not that great of a pipe unless you have that bore. Sometimes I find old stuff in people's inventory. If someone is looking for something for these motors pm me, I've got some experience in em.
Re: AF05 87' Elite SE50 question.
Thanks for the responses. So after comparing the pipe on his bike to the pics, it's definitely the unrestricted one. So I'm going take it from the top and put the stock weights back and a fresh Polini belt and see where that gets us. He said it creeps up to 40 on a flat but takes like 30 seconds or so to get there, after the variator. So I'm betting the fresh belt and stock weights will be the winning ticket.
92 Yamaha Jog CY50
98 Yamaha Zuma
00 Honda Elite 50SR
82 Honda MB5
90 Honda NS50F
14 Yamaha FZ-09
16 Kawasaki Versys 650
98 Yamaha Zuma
00 Honda Elite 50SR
82 Honda MB5
90 Honda NS50F
14 Yamaha FZ-09
16 Kawasaki Versys 650
Re: AF05 87' Elite SE50 question.
Have you ever tested it with a different bore?benji wrote: That polini pipe is actually designed for a specific bore, so it's not that great of a pipe unless you have that bore.
I need to find some new haters...the ones I have are starting to like me.
Re: AF05 87' Elite SE50 question.
You did. How did it work out? According to the info i was able to find on it, its meant for a 65-70cc cylinder.
Re: AF05 87' Elite SE50 question.
I've run a polini cast iron cylinder on this motor and an airsal aluminum nikasil cylinder on my previous motor. I personally liked the airsal better, but the polini has lasted FAR longer.