Page 1 of 1
85 spree muffler mod
Posted: Mon Sep 25, 2017 4:02 pm
by reitmeyer
My stock exhaust is missing the final tube that comes out of the body of the muffler. Just a 1" hole there. Runs loud. I was thinking of adding a silencer. Looking through the hole into the body of the muffler, I see a 1/2" tube. Would I need to connect directly to that or do I weld to the conical back of the muffler?
Re: 85 spree muffler mod
Posted: Mon Sep 25, 2017 4:25 pm
by Jonadz
I would just get a new one, I've played with a few that had been opened up and never got a decent run with any. Looks like you have the heat guard, that's worth more than the pipe in my opinion, mine are all missing that. I have an extra pipe I'm not doing anything with if you're interested.
Re: 85 spree muffler mod
Posted: Mon Sep 25, 2017 4:48 pm
by motormike
Jonadz wrote:I would just get a new one, I've played with a few that had been opened up and never got a decent run with any. Looks like you have the heat guard, that's worth more than the pipe in my opinion, mine are all missing that. I have an extra pipe I'm not doing anything with if you're interested.
This man's experience sounds like good advice.
I'd buy a good pipe before wasting time only to find that he was right.
Re: 85 spree muffler mod
Posted: Mon Sep 25, 2017 5:53 pm
by ped
If money is No Object I would buy a new pipe.
If you have no money, you can weld a short piece of round tube in there. I'm pretty sure it doesn't connect to the other pipe inside. GL
Re: 85 spree muffler mod
Posted: Tue Sep 26, 2017 10:44 am
by jakubman1
Ive got the exact same muffler sitting in the shed if you need it. Ill sell it for cheap cause 1 of the baffles are loose inside. I can hear it rattle unless i squeeze the end of the exhuast then the rattle is gone. Solid peice though to get your spree back on the road.
Lemme know