Crankshaft threads stripped.. help

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
ScottsdaleArizona
Noob
Noob
Posts: 6
Joined: Tue Nov 12, 2019 6:23 pm

Crankshaft threads stripped.. help

Post by ScottsdaleArizona »

Hi there .. my face drive came looses and ended up stripping The teeth at the end of the driveshaft.. Im having a hard time finding the correct replacement .. I purchased these 2 ..and they’re not the right part.. the one on the right supposedly is for my 1987 SE50... and it is really close.. only difference is it’s a little thicker .. the variator/boss won’t fit over it... are there 2 different sizes for se50 and maybe se50A? Can I use this one and use the variator with bigger inner diameter? Any help..or advice is welcome ! Thanks
Attachments
BD4F2E15-E5C1-4466-9FBE-B07FBAB0BC28.jpeg
BD4F2E15-E5C1-4466-9FBE-B07FBAB0BC28.jpeg (34.02 KiB) Viewed 4364 times
5A42E05A-B4B8-4735-8F2E-C6D5384436A6.jpeg
5A42E05A-B4B8-4735-8F2E-C6D5384436A6.jpeg (46.73 KiB) Viewed 4364 times
Last edited by ScottsdaleArizona on Wed Nov 27, 2019 6:08 pm, edited 1 time in total.
User avatar
bonesv
Moderator
Moderator
Posts: 2127
Joined: Sun Jun 26, 2011 2:00 pm
Location: Florida

Re: Driveshaft threads stripped.. help

Post by bonesv »

Yea, there's a service manual that can help you identify the correct part(s) of which you would like to know about. That 2nd pic you just posted is of the "crankshaft" and yes those "splines" are stripped. That will be a job for an experienced scooter mechanic and most likely will have to replace the damaged part(crankshaft). This pdf may save you some time. http://hondaspree.net/wiki/index.php5?t ... ce_Manuals
Honda Elite SR
Honda Elite-Dio ZX

Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
ScottsdaleArizona
Noob
Noob
Posts: 6
Joined: Tue Nov 12, 2019 6:23 pm

Re: Driveshaft threads stripped.. help

Post by ScottsdaleArizona »

Thx



Just can’t find one anywhere .. I’m planning on doing the work myself
Last edited by ScottsdaleArizona on Wed Nov 27, 2019 6:49 pm, edited 1 time in total.
ScottsdaleArizona
Noob
Noob
Posts: 6
Joined: Tue Nov 12, 2019 6:23 pm

Re: Crankshaft threads stripped.. help

Post by ScottsdaleArizona »

Check that: part number I need

13321-gn2-600
User avatar
bonesv
Moderator
Moderator
Posts: 2127
Joined: Sun Jun 26, 2011 2:00 pm
Location: Florida

Re: Driveshaft threads stripped.. help

Post by bonesv »

ScottsdaleArizona wrote: Wed Nov 27, 2019 5:35 pm Thx
I just can’t find one anywhere .. I’m planning on doing the work myself
I don’t recommend you tearing that whole motor apart to replace the crank unless you have done this kind of repair before. You called that part a driveshaft when it was in fact a crankshaft and that tells me something and the reason I recommended a scooter mechanic.
Honda Elite SR
Honda Elite-Dio ZX

Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Post Reply