Can anyone help me figure out what size the screws are that connect brake levers to handlebar?
1986 Honda Spree NQ50
Just the screw pictured here on this listing.
https://www.ebay.com/itm/HONDA-SPREE-NQ ... 0667.m2042
My friend just gifted me the Moped as he was moving and didn't want to bring it with him. Previous owner had just used some generic screws to hold levers and they are all wobbly- not sure what they were thinking.
Anyways, I ordered tires, tubes, new air filter & spark plug (from link on this site!)
The moped fired up with a battery charge, new gas and a little starting fluid.
I will post pics when it all comes together!
Screw size for brake lever 86 NG50
Moderator: Moderator
Re: Screw size for brake lever 86 NG50
Hello and welcome Mr. Tortoise.
The bolts you are seeking are very specific to brake levers,
and cannot be described easily by size.
There must be a "shoulder" of no threads to allow for proper operation.
I suggest you place a Wanted ad in this forum and get some used screws.
It seems that parts suppliers do not offer this specialized screw. afaik.
The bolts you are seeking are very specific to brake levers,
and cannot be described easily by size.
There must be a "shoulder" of no threads to allow for proper operation.
I suggest you place a Wanted ad in this forum and get some used screws.
It seems that parts suppliers do not offer this specialized screw. afaik.
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"