Buying new parts

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
broomhilda
Noob
Noob
Posts: 8
Joined: Wed Sep 05, 2007 5:33 am
Location: South Carolina

Buying new parts

Post by broomhilda »

If you have to buy new parts for sprees, where do you get them?
User avatar
edjo
Spree
Spree
Posts: 113
Joined: Wed Aug 29, 2007 10:50 pm
Location: fort collins

Post by edjo »

I have had great luck with Bikebandit.com they have had everything I wanted so far, gaskets, reed valves carb kits etc... Fot performance stuff vtcycles.com has big bore kits, pulley kits, air cleaners etc... I also just bought a petcock off ebay, half the price from other places.
88 elite SA50
07 DRZ436sm
05 FJR1300a
05 Dr200se
User avatar
rickc
BMX
BMX
Posts: 24
Joined: Fri Jul 06, 2007 12:33 pm
Location: Oregon, USA

Post by rickc »

eBay or local Honda powersports dealer
'86 Spree x 3
User avatar
Dac
Veteran OG
Veteran OG
Posts: 3342
Joined: Sat May 05, 2007 5:58 pm
Location: SouthWest Michigan
Contact:

Post by Dac »

Honda powersports dealers is were i go, little high on prices but you get your parts in no more them 3days and its honda quality
"Its not what you ride, its that you ride"
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
User avatar
edjo
Spree
Spree
Posts: 113
Joined: Wed Aug 29, 2007 10:50 pm
Location: fort collins

Post by edjo »

Bye the way Bikebandit sells OEM parts and they are cheaper than getting them from the stealership.
88 elite SA50
07 DRZ436sm
05 FJR1300a
05 Dr200se
broomhilda
Noob
Noob
Posts: 8
Joined: Wed Sep 05, 2007 5:33 am
Location: South Carolina

OEM

Post by broomhilda »

funny you should mention Honda dealerships. I took the bike up to our local Honda dealer (I bought my metro from them) they sent it over to a bike shop and the guy wanted to put a Briggs/Straten in it. Said the compression was to low. When I asked about comp was he forgot. Didn't forget the price on new engine tho...

AND they look at me like I'm from mars- opps that's Venus!

I'm watching some stuff on ebay. I need a bystarter, set plate and screws. Seems the guy I bought the bike from didn't think the set plate was important enough to put back on the bike.
Post Reply