Starts but dont go...

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
jayrey0910
BMX
BMX
Posts: 25
Joined: Thu Aug 02, 2007 6:03 pm

Starts but dont go...

Post by jayrey0910 »

my 85 spree will start, its runnung rough and the rear wheel is bearly moving on full throtle.....new spark plug in it. any suggestions?
Kenny_McCormic
CBR1000RR
CBR1000RR
Posts: 4957
Joined: Sun Apr 16, 2006 11:51 am
Location: Southern Michigan

Post by Kenny_McCormic »

Does it run up to high rpms? Do a plug chop to see why exactly its running rough and pull off the trans cover so you can make sure everything is intact and OK.
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
User avatar
Farfignugin
Veteran OG
Veteran OG
Posts: 489
Joined: Mon Jul 23, 1973 10:24 am
Location: Unadilla, NY

Post by Farfignugin »

It's also a good idea to not have the scooter running when you pull off the trans cover.
Kenny_McCormic
CBR1000RR
CBR1000RR
Posts: 4957
Joined: Sun Apr 16, 2006 11:51 am
Location: Southern Michigan

Post by Kenny_McCormic »

I figured he would figure that out, also you cant run it while missing the trans cover, the cover holds the starter in place.
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
wrxstiguy2004
BMX
BMX
Posts: 42
Joined: Mon Oct 22, 2007 1:37 am
Location: Portland OR

Post by wrxstiguy2004 »

Maybe the rear brake is ON or stuck ON....???
Kenny_McCormic
CBR1000RR
CBR1000RR
Posts: 4957
Joined: Sun Apr 16, 2006 11:51 am
Location: Southern Michigan

Post by Kenny_McCormic »

That happened to me once, had to buy a new cable.
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
User avatar
Dac
Veteran OG
Veteran OG
Posts: 3342
Joined: Sat May 05, 2007 5:58 pm
Location: SouthWest Michigan
Contact:

Post by Dac »

Kenny_McCormic wrote:That happened to me once, had to buy a new cable.
lol, if its stuck, and you get it unstuck, STILL buy a new cable!

my sundiro's brakes were froze, i got them unfroze, first ride the cable snapped. Yet another fun ride...
"Its not what you ride, its that you ride"
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
User avatar
uspmale
Spree
Spree
Posts: 216
Joined: Mon Jul 23, 1973 10:24 am
Location: Wauwatosa WI.

Post by uspmale »

Spin the rear wheel when up on the stands.
If it spins freely then the brakes are released.
Me thinks he has carb issues????
User avatar
Dac
Veteran OG
Veteran OG
Posts: 3342
Joined: Sat May 05, 2007 5:58 pm
Location: SouthWest Michigan
Contact:

Post by Dac »

uspmale wrote:Spin the rear wheel when up on the stands.
If it spins freely then the brakes are released.
Me thinks he has carb issues????
lol, yeah i cant believe some one didn't sagest that already, that is a good thing to try...

The carb does get dirty sometimes, and when stuff gets in the jets or tubes or something. the motor will run rough. Some time to the point were at WOT the back tire will hardy turn.

My 92 elite is picky about what air filter i have on it. If i put some thing differnt then the stock air box. when i go to ride the motor sounds ok but it will hardy move. It feels like the brake is stuck on. What type of air filter you got? ( It might be time to clean it up some )
"Its not what you ride, its that you ride"
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
User avatar
jayrey0910
BMX
BMX
Posts: 25
Joined: Thu Aug 02, 2007 6:03 pm

Post by jayrey0910 »

thnaks for the repls.

i think it is my choke(bystarter) the needle ias not moving up and down. i think the spring is shot.
User avatar
uspmale
Spree
Spree
Posts: 216
Joined: Mon Jul 23, 1973 10:24 am
Location: Wauwatosa WI.

Post by uspmale »

Let me know if you need a choke.
I have a few in stock.
Post Reply