starter relay

darat · Post by **darat** » Thu Apr 21, 2005 10:13 am

i was just wondering what the starter relay does? will this affect the way the starter works

BluPhire · Post by **BluPhire** » Thu Apr 21, 2005 10:56 am

it will effect the electric start, just don't mess with it to be safe.

vette76 · Post by **vette76** » Thu Apr 21, 2005 11:12 am

that is why the brake needs to be engaged to start it. my starter relay died so i bypassed it to a boat ignition, so all i do is turn the key to start it now.(like a car)

BluPhire · Post by **BluPhire** » Thu Apr 21, 2005 11:13 am

that's pretty cool.

vette76 · Post by **vette76** » Thu Apr 21, 2005 11:16 am

plus the ignition is all chrome and rust proofed.(the only chrome piece on it.

BluPhire · Post by **BluPhire** » Thu Apr 21, 2005 11:18 am

ur just 1 happy lil f***er aren't u?

vette76 · Post by **vette76** » Thu Apr 21, 2005 11:21 am

yeah. BOAT PARTS AND SPREE PARTS ARE INTERCHANGEABLE!

BluPhire · Post by **BluPhire** » Thu Apr 21, 2005 11:23 am

DENMAN · Post by **DENMAN** » Fri Jul 08, 2005 10:24 pm

THE STARTER RELAY KEEPS THE FULL POWER OF THE BATTERY FROM FLOWING THROUGH THE WHOLE ELECTRICAL SYSTEM AND DIRECTS IT STRAIGHT TO THE STARTER WHEN THE STARTING SYSTEM IS ENGAGED.

vette76 · Post by **vette76** » Sat Jul 09, 2005 12:53 am

it can be bypassed if needed. this is really just the safety so the brake has to be engaged.

innieTT · Post by **innieTT** » Fri Jul 29, 2005 2:35 am

where can I get a new one of these? Thank you.

vette76 · Post by **vette76** » Fri Jul 29, 2005 2:49 am

ebay sometimes. check out weblinks. there might be some good parts sites in there.

Jamie_Miles · Post by **Jamie_Miles** » Sat Jul 30, 2005 3:00 am

The starter relay is just that, a relay. It's kind of hard to explain how it works but in a nut shell: your starter button on your handlebars and the wireing to it is not capable of handling the amps that the starter draws from the battery. The relay has 4 prongs on it. When you push your starter button it connects two of those prongs together and sends power to a coil inside the relay. The coil creates a magnetic field which closes a switch inside the relay (thats why it "clicks". That switch is capeable of handling the amps it takes to turn the starter.

The Spree starter is relatively low amps so it would not be hard to find a switch that can handle the amp's and just bypass the relay.

MySpree · Post by **MySpree** » Sat Jul 30, 2005 5:26 pm

hmm im likeing the sound of the turn key start like a car!