Page 1 of 1
Electric Impact gun for pulley bolt?
Posted: Thu Jun 12, 2008 11:00 pm
by elnene2k
I'm trying to figure out if an electric impact gun would be enough to unscrew both pulley bolts for my Aero? Any suggestions out there...I already found out a couple tricks from searching but just checking to see if people have new suggestions...
Posted: Thu Jun 12, 2008 11:03 pm
by mopedman
well we got mine off today by sticking rope in the hole for the spark plug then you use a ratchet and a socket, what happens is the rope makes the piston lock up cause it cant go up all the way it work really good
Posted: Thu Jun 12, 2008 11:04 pm
by CharlotteSpreeRider
The impact wrench should work. I don't have one, so I use the methods you are aluding to.
-aseigler
Posted: Thu Jun 12, 2008 11:05 pm
by kolohe
I use an electric impact and it works fine.
Posted: Thu Jun 12, 2008 11:06 pm
by gobucks
the electric gun works well i do it all the time, also an air gun works
Posted: Thu Jun 12, 2008 11:39 pm
by elnene2k
OK Cool...I'm just going to go buy this one at Sears...it got great reviews and the maximum torque is 900 in lbs which seems alot for n impact gun! Not bad price either..