Page 2 of 2
Posted: Thu Oct 09, 2008 2:23 pm
by MotorMaker
Not to mention bolts are way cheaper than all-thread.
Posted: Thu Oct 09, 2008 8:25 pm
by slaughter83
GO with the cheap easy way. I did it on the front and back bolts on my spree. The back one got tight after much screwing, then i used the nut on the other side to tighten it. Works fine
Re: Carb Bolt Falls Off - Stripped, Not Proper Size?
Posted: Thu Sep 21, 2017 11:17 pm
by Andrus
Does someone have a link to a nut that will fit in that tiny gap?
Re: Carb Bolt Falls Off - Stripped, Not Proper Size?
Posted: Sun Oct 01, 2017 9:58 am
by mousewheels
Andrus wrote:Does someone have a link to a nut that will fit in that tiny gap?
One source US wide is Fastenal, they have about 2700 stores.
Link: M6x1.0 Stainless Jam nut - Fastenal