Trying to get your Spree/Elite to run, or run better? Post your questions here.
Moderator: Moderator
spreefreak
BMX
Posts: 30 Joined: Mon Jul 23, 1973 10:24 am
Post
by spreefreak » Thu Aug 11, 2005 1:26 pm
when i ride my spree the back end shakes when first gets going while ridding. I changed the belt but that didnt do any thing. I also have trouble with starting the engine up right away i changed the ignition, the spark plug and the battery.
Please help
vette76
CB900F
Posts: 1853 Joined: Sat Jul 31, 2004 8:00 pm
Location: rhode island
Post
by vette76 » Thu Aug 11, 2005 1:29 pm
rim bent? faulty tire? bent axle?
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
spreefreak
BMX
Posts: 30 Joined: Mon Jul 23, 1973 10:24 am
Post
by spreefreak » Thu Aug 11, 2005 1:33 pm
thanks ill have to check that out have any more suggestions
Spreewell
Spree
Posts: 130 Joined: Mon Jul 23, 1973 10:24 am
Location: Minnesota
Post
by Spreewell » Thu Aug 11, 2005 3:10 pm
Looks like it could be a clutch problem. You should be able to rev it on the stand and visually see if the rim is bent.
spreefreak
BMX
Posts: 30 Joined: Mon Jul 23, 1973 10:24 am
Post
by spreefreak » Thu Aug 11, 2005 3:27 pm
thanks for the tips ill have to try that today. any more tips
hondaman
Elite
Posts: 529 Joined: Mon Jul 23, 1973 10:24 am
Post
by hondaman » Fri Aug 12, 2005 8:23 pm
change the tranny fluid. Use 10w-40 .
vette76
CB900F
Posts: 1853 Joined: Sat Jul 31, 2004 8:00 pm
Location: rhode island
Post
by vette76 » Fri Aug 12, 2005 9:21 pm
yeah, that could be. that happened to me once and the tranny was overfilled.
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx