REAR WHEEL REMOVAL

tony6264 · Post by **tony6264** » Wed Apr 22, 2009 10:10 pm

I have a dumb question....I am going to remove the rear wheel from my scooter and I want to see if I am right.
After I take off the muffler and remove the so called "nut from *"
is it pretty straight forward?
Would it be like pulling a rear wheel from a car with the wheel attached to the drum?

Wheelman-111 · Post by **Wheelman-111** » Wed Apr 22, 2009 10:50 pm

Greetings:

Breaking that large nut isn't so bad. A 7/8 box-end or socket + the Miracle of leverage usually works.

Once off, the wheel slides off its splines with a little wiggle.

Use a 7/8 socket and 80 ft-lb on torque wrench to install. Do this part attentively. A loose wheel can ruin your whole day.

tony6264 · Post by **tony6264** » Wed Apr 22, 2009 11:39 pm

Yeah, I bet not putting that nut tight enough would ruin my day

I dont own a torque wrench, But I will be sure to make it tight.

CharlotteSpreeRider · Post by **CharlotteSpreeRider** » Thu Apr 23, 2009 7:31 am

tony6264 wrote:...remove the so called "nut from *"...

If you think that's the nut from *, you've never tried to get the clutch apart...

maddog · Post by **maddog** » Fri Apr 24, 2009 3:33 am

both are easy to take off after you do it a thousand times

and an impact gun.

Honda Spree and Elite 50 Forums

REAR WHEEL REMOVAL

REAR WHEEL REMOVAL

Nuts

Re: REAR WHEEL REMOVAL