I have an 86 Spree and I need to take the ignition assembly to a locksmith to have a new key made. I've taken a look at it and since I'm no good at soldering I'm not sure what to do. A Honda guy told me to follow the wires and there will be a plug...I looked before and didn't see one.
Is there an easy way to get the ignition off and back on the bike?
Thanks
lost key/removing ignition
Moderator: Moderator
yes there should be a connector 6" behind the ignition. it might be in the loom. you can also take the seat lock off. its just 1 clip u pull off from behind the panel, and it slides out. might be easier.
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
- Justinsane
- Spree
- Posts: 281
- Joined: Mon Jul 23, 1973 10:24 am
- Location: Oshkosh, Wisconsin
did you need that ignition code for having the keys made? or did you just give them the seat lock and they made a key from it?mikeg wrote:success!
i now have two keys. cost: $12 cdn.
i ended up disconnecting the ignition thing.
there is a code on there for having replacement keys made.
thanks again.