i need help going a lil faster
Moderator: Moderator
i need help going a lil faster
hey i have a 1989 honda elite sb50p and a variator out of a 87 elite se50p i wama put it into my 89 elite . what stock roller weights are in that and what ones should i get to get faster speed and not trash my axceleration i weigh about 235lbs for the clutch a want to get a new center spring and new grab springs but what rpm ones shoud i get to get going good and faster andf have good exel
.thanks alot
.thanks alot
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
Re: i need help going a lil faster
are you using 87 elite 50 motor in your elite E?
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Re: i need help going a lil faster
no sb50p stock motor
bakaracer wrote:are you using 87 elite 50 motor in your elite E?
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
Re: i need help going a lil faster
To my knowledge, you are substituting a restricted variator for another restricted one. I was certain the P in the model number were the restricted ones released by Honda to keep it at 25-30 for the moped laws in some states. I believe the variator backplate for these are flat and do not allow the belt to hit top gear.
I would just get a keli variator that comes with weights... 9g I think. But if you have the P model, then you have other restrictions as well.
I would just get a keli variator that comes with weights... 9g I think. But if you have the P model, then you have other restrictions as well.
Re: i need help going a lil faster
what restrictions does my sb50p have
ktroy wrote:To my knowledge, you are substituting a restricted variator for another restricted one. I was certain the P in the model number were the restricted ones released by Honda to keep it at 25-30 for the moped laws in some states. I believe the variator backplate for these are flat and do not allow the belt to hit top gear.
I would just get a keli variator that comes with weights... 9g I think. But if you have the P model, then you have other restrictions as well.
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
Re: i need help going a lil faster
Read about it on this forum. It's all over on how to de-restrict them. Top of my head its the variator, exhaust pipe, oil pump cable (or lack thereof), and a main jet in the carb. May be more but I think that is the bulk of them.
Or maybe its not restricted anymore. How fast does it go on a flat?
Or maybe its not restricted anymore. How fast does it go on a flat?
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: i need help going a lil faster
There is no variator on an elite espewya wrote:what restrictions does my sb50p have
That is the main restriction.
get the taz 44mm bbk and up gears
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: i need help going a lil faster
so i heard that i have to modify my 1985 honda spree if i wanna add another 10-15 horses, which makes sense. But i was wondering if i could do anything with a stock engine to add more power and mph without any modifications? thanks.
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: i need help going a lil faster
The spree engine makes under 3hp stock.Portugal6 wrote:so i heard that i have to modify my 1985 honda spree if i wanna add another 10-15 horses, which makes sense. But i was wondering if i could do anything with a stock engine to add more power and mph without any modifications? thanks.
There is nothing you can do to ADD 10-15 HP for free.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: i need help going a lil faster
Greetings:
Quoth Portugal6:
Can I get Flash to hang with my buddies' Hayabusas? I'd prefer not to have to adjust anything, including my mirrors. They're set just so right now.
On a related note, maybe you can help me convert my Family Truckster into a Bugatti Veyron? Without opening the hood?
Quoth Portugal6:
I sense this just might be a Troll. OK, I'll bite:so i heard that i have to modify my 1985 honda spree if i wanna add another 10-15 horses, which makes sense. But i was wondering if i could do anything with a stock engine to add more power and mph without any modifications? thanks
Can I get Flash to hang with my buddies' Hayabusas? I'd prefer not to have to adjust anything, including my mirrors. They're set just so right now.
On a related note, maybe you can help me convert my Family Truckster into a Bugatti Veyron? Without opening the hood?
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: i need help going a lil faster
Portugal6 wrote:so i heard that i have to modify my 1985 honda spree if i wanna add another 10-15 horses, which makes sense. But i was wondering if i could do anything with a stock engine to add more power and mph without any modifications? thanks.
Oh yes ....I almost forgot you can buy wheelman's POWERBAND for your spree. Easy 15-20mph faster in the 1/8th mile.
the acme products also work great for the spree.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: i need help going a lil faster
I have a 25hp Nitrous kit on my Drag scooter.... never used more than the 15hp nozzles... mostly the 10hp
I sure wouldnt try it on a stock motor
I sure wouldnt try it on a stock motor
Re: i need help going a lil faster
ya there isnt a vairitor on it but i wana try and put 1 frome a se50p but i heard i cant , is that true. an how muh is a 44mm bbk and gaers.. and lower in the post some1 said get a powerband for 15-20 mph . what is that
Trafficjamz wrote:There is no variator on an elite espewya wrote:what restrictions does my sb50p have
That is the main restriction.
get the taz 44mm bbk and up gears
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
Re: i need help going a lil faster
o ya it goes 30-32 on flat and i weigh 250
spewya wrote:ya there isnt a vairitor on it but i wana try and put 1 frome a se50p but i heard i cant , is that true. an how muh is a 44mm bbk and gaers.. and lower in the post some1 said get a powerband for 15-20 mph . what is that
Trafficjamz wrote:There is no variator on an elite espewya wrote:what restrictions does my sb50p have
That is the main restriction.
get the taz 44mm bbk and up gears
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
Re: i need help going a lil faster
Irrelevant question, but what do you have a 4 stroke motor for your avatar?
These would be better.
These would be better.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree