wider belt or variator filing?
Moderator: Moderator
wider belt or variator filing?
ive been in the process of tuning my elite and while playing ive noticed the belt doesnt run completely up the face of the variator face id like to get the most out of this, o wise tuners would i need to modify the base of the variator to get the extra .5 cms at the top of the face?
Derestricted 87 Honda Elite SE50p Iowa
DDX variator 7g
Uni Pod FIlter
DDX variator 7g
Uni Pod FIlter
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: wider belt or variator filing?
Greetings:
Some Forum denizens are wise, but not mind-readers. What variator? Which belt do you have now? Sometimes with an oversize vario the limiting factor is the other half of the pulley, the outer one with the starter teeth. Note how the shape goes from conical to flat?
Some Forum denizens are wise, but not mind-readers. What variator? Which belt do you have now? Sometimes with an oversize vario the limiting factor is the other half of the pulley, the outer one with the starter teeth. Note how the shape goes from conical to flat?
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: wider belt or variator filing?
variator is VT's DDX variator with the polini 248.002 belt, what would options be for the other half of the pulley if there is any?
Derestricted 87 Honda Elite SE50p Iowa
DDX variator 7g
Uni Pod FIlter
DDX variator 7g
Uni Pod FIlter