soft seize?

swimmingfree · Post by **swimmingfree** » Sun Feb 26, 2012 10:43 pm

i hope you did more then just that one spot??? kingkamehameha is doing a block you shod read more of his stuff and find the other ones he did ..

bakaracer im not going to by tools that have only one job ................ and i use a chicken foot puller to brake the case as well yes i my brake one some day but o well i dont need another tool that set in my tool box i have only use 2 times ..
or pay a shop 80 dollers a hour to do it from me.. im smart anuff not to do this fast it a slow and take it ezey thing..
swimmingfree

iceman77 · Post by **iceman77** » Mon Feb 27, 2012 5:11 pm

I got everything back together, put it on the bike and did a compression check. 65psi

i'm convinced that it's the base gasket. i'm gonna put the stock bore back on and see what compression i get. if it's good i'm gonna order a new gasket for the 51mm bore.

TJ

iceman77 · Post by **iceman77** » Tue Feb 28, 2012 10:33 am

i put the stock bore back on last night. compression is good but she wont start. i checked for spark and fuel and she's getting both.
any ideas?

Thanks:
TJ

swimmingfree · Post by **swimmingfree** » Tue Feb 28, 2012 10:36 am

what is good???
you need to prim the motor..
swimmingfree

Mystic · Post by **Mystic** » Tue Feb 28, 2012 10:39 am

it may be too rich if you still have the large carb and intake on there

iceman77 · Post by **iceman77** » Tue Feb 28, 2012 10:39 am

swimmingfree wrote:what is good???
you need to prim the motor..
swimmingfree

127psi... i never primed it b4

TJ

iceman77 · Post by **iceman77** » Tue Feb 28, 2012 10:40 am

Mystic wrote:it may be too rich if you still have the large carb and intake on there

i have stock intake and stock carb. but a bigger jet.

swimmingfree · Post by **swimmingfree** » Tue Feb 28, 2012 10:41 am

is the plug wet???
swimmingfree

iceman77 · Post by **iceman77** » Tue Feb 28, 2012 10:43 am

swimmingfree wrote:is the plug wet???
swimmingfree

no it's dry.

TJ

bakaracer · Post by **bakaracer** » Tue Feb 28, 2012 10:43 am

iceman77 wrote:i put the stock bore back on last night. compression is good but she wont start. i checked for spark and fuel and she's getting both.
any ideas?

Thanks:
TJ

Double check again. If your getting spark and fuel and the compression is good,it should fire right up. If it doesn't then one of those is bad.

iceman77 · Post by **iceman77** » Tue Feb 28, 2012 10:45 am

bakaracer wrote:
iceman77 wrote:i put the stock bore back on last night. compression is good but she wont start. i checked for spark and fuel and she's getting both.
any ideas?

Thanks:
TJ
Double check again. If your getting spark and fuel and the compression is good,it should fire right up. If it doesn't then one of those is bad.

i double checked last night but i'll check it again just to be certain.

TJ

iceman77 · Post by **iceman77** » Tue Feb 28, 2012 10:50 am

even if it's rich shouldn't it still run?

TJ

swimmingfree · Post by **swimmingfree** » Tue Feb 28, 2012 10:52 am

if the plug is to wet no it wont start ... air mix need to be close to start ..
swimmingfree

iceman77 · Post by **iceman77** » Tue Feb 28, 2012 10:54 am

swimmingfree wrote:if the plug is to wet no it wont start ... air mix need to be close to start ..
swimmingfree

plug isn't wet so that shouldn't be the problem i wouldn't think.

TJ

swimmingfree · Post by **swimmingfree** » Tue Feb 28, 2012 11:00 am

i wood prim it ..if your set leen it will help it start... a little exter gas is not going to hurt ..
swimmingfree

Honda Spree and Elite 50 Forums

soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?

Re: soft seize?