28mm Carb Users: Look at This Part!
Moderator: Moderator
- z50r-ghost
- CB900F
- Posts: 1191
- Joined: Fri Sep 12, 2008 3:46 am
- Location: blank
28mm Carb Users: Look at This Part!
Hey all,
For the guys that are using 28mm carbs and a "flange" style intake manifold, (Stage6, KOSO, etc) look at this part:
http://www.ebay.com/itm/Carburetor-Bill ... 1356wt_689
This is a billet aluminum flange that takes the place of the rubber flange on the intake manifold that is NOTORIOUS for cracking... This would solve the problem... It also has a rubber ORing seal. I can email him for the dimension details (looks like it would fit perfectly)
I have ordered from this eBay seller and have had great results. Shipping takes 10 days. Great prices, and the parts (and anodized finish) are amazing quality. Japanese-level stuff.
Just a thought... I had replaced my Stage6 intake manifold rubber flange twice due to cracking...
Later guys, j
For the guys that are using 28mm carbs and a "flange" style intake manifold, (Stage6, KOSO, etc) look at this part:
http://www.ebay.com/itm/Carburetor-Bill ... 1356wt_689
This is a billet aluminum flange that takes the place of the rubber flange on the intake manifold that is NOTORIOUS for cracking... This would solve the problem... It also has a rubber ORing seal. I can email him for the dimension details (looks like it would fit perfectly)
I have ordered from this eBay seller and have had great results. Shipping takes 10 days. Great prices, and the parts (and anodized finish) are amazing quality. Japanese-level stuff.
Just a thought... I had replaced my Stage6 intake manifold rubber flange twice due to cracking...
Later guys, j
.locked away in a cage my rage has got the best of me
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
Re: 28mm Carb Users: Look at This Part!
It will work on the 21, 24 and 26 carbs too.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: 28mm Carb Users: Look at This Part!
I wondered why ghost didn't mention that. I might get one now that i know for sure.Bear45-70 wrote:It will work on the 21, 24 and 26 carbs too.
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
- z50r-ghost
- CB900F
- Posts: 1191
- Joined: Fri Sep 12, 2008 3:46 am
- Location: blank
Re: 28mm Carb Users: Look at This Part!
Kyle,
Actually Bear is correct; the flange will work on ALL of the Keihin PWK "D-Slide" (OKO) type carbs from 21-28mm.
I just forgot to mention the fact it will fit on the other size carbs as well.
Keep in mind that an intake manifold (such as the Stage6) doesn't "care" what size carb is going to be put in the rubber flange; a 21mm thru 28mm fits...
This tells you that the outlet of the PWK style carbs is the same outer diameter. The Innerdiameter is what varies.
** I just noticed that the billet carb adapter in my link has been sold! **
-Maybe someone here on HS.net bought one...
Again, don't let the fact that these parts are in Thailand worry you; I've spoken to *nuadthaiderm* (seller) quite a bit, and I personally am a repeat-customer. Parts always arrive to my mailbox in 10 days from Thailand.
The parts he sells are 100% TOP-NOTCH. The quality of the machining, fit & finish is amazing.
I have my 2nd "Air Funnel" arriving this week for my NS from *nuadthaiderm*
I actually prefer this seller's Air Funnels / Velocity Stacks over the Funnels I have bought from Takegawa Japan. The quality and finish is much better than Takegawa's design.
Hope this helps, j.
Actually Bear is correct; the flange will work on ALL of the Keihin PWK "D-Slide" (OKO) type carbs from 21-28mm.
I just forgot to mention the fact it will fit on the other size carbs as well.
Keep in mind that an intake manifold (such as the Stage6) doesn't "care" what size carb is going to be put in the rubber flange; a 21mm thru 28mm fits...
This tells you that the outlet of the PWK style carbs is the same outer diameter. The Innerdiameter is what varies.
** I just noticed that the billet carb adapter in my link has been sold! **
-Maybe someone here on HS.net bought one...
Again, don't let the fact that these parts are in Thailand worry you; I've spoken to *nuadthaiderm* (seller) quite a bit, and I personally am a repeat-customer. Parts always arrive to my mailbox in 10 days from Thailand.
The parts he sells are 100% TOP-NOTCH. The quality of the machining, fit & finish is amazing.
I have my 2nd "Air Funnel" arriving this week for my NS from *nuadthaiderm*
I actually prefer this seller's Air Funnels / Velocity Stacks over the Funnels I have bought from Takegawa Japan. The quality and finish is much better than Takegawa's design.
Hope this helps, j.
.locked away in a cage my rage has got the best of me
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Re: 28mm Carb Users: Look at This Part!
http://www.ebay.com/itm/320914282755?ss ... 074wt_1180
Can still get this one! Just bought one thanks for the info!!!
Can still get this one! Just bought one thanks for the info!!!
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 28mm Carb Users: Look at This Part!
z50r-ghost wrote: ** I just noticed that the billet carb adapter in my link has been sold! **
-Maybe someone here on HS.net bought one...
I bought it.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- z50r-ghost
- CB900F
- Posts: 1191
- Joined: Fri Sep 12, 2008 3:46 am
- Location: blank
Re: 28mm Carb Users: Look at This Part!
Awesome guys, always glad to help!
-j
-j
.locked away in a cage my rage has got the best of me
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
- kingkamehameha
- CB900F
- Posts: 1215
- Joined: Sat Apr 16, 2011 1:11 pm
- Location: kailua kona
- z50r-ghost
- CB900F
- Posts: 1191
- Joined: Fri Sep 12, 2008 3:46 am
- Location: blank
Re: 28mm Carb Users: Look at This Part!
Thanks, kingkamehameha!
...and I love you too, man!
ghost
...and I love you too, man!
ghost
.locked away in a cage my rage has got the best of me
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 28mm Carb Users: Look at This Part!
Got mine today.....I does not fit the stage 6 manifold, or ct black, or the big black it is too small.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- z50r-ghost
- CB900F
- Posts: 1191
- Joined: Fri Sep 12, 2008 3:46 am
- Location: blank
Re: 28mm Carb Users: Look at This Part!
Hey Jamz,
Dam dude... Sorry bro; seemed like it would have been designed for the most common flange in existence.
Shoot me an email with the total you paid for it,
And I will buy it from you for the $ ya have in it.
I don't know if I'll ever find anything to use it on, but if all else fails I'll hang it around my neck.
TE37scag@aol.com
Later bro; j
Dam dude... Sorry bro; seemed like it would have been designed for the most common flange in existence.
Shoot me an email with the total you paid for it,
And I will buy it from you for the $ ya have in it.
I don't know if I'll ever find anything to use it on, but if all else fails I'll hang it around my neck.
TE37scag@aol.com
Later bro; j
.locked away in a cage my rage has got the best of me
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 28mm Carb Users: Look at This Part!
I will find a use for it.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: 28mm Carb Users: Look at This Part!
bolt pattern is narrow for sure but a little mod job ..she go!
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 28mm Carb Users: Look at This Part!
tru72 wrote:bolt pattern is narrow for sure but a little mod job ..she go!
can you take a pic of the modded manifold without the aluminum flange.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: 28mm Carb Users: Look at This Part!
Traffic, its not the manifold thats modified hehe
just widen up the flange holes with a dremel or mill, its got maybe 2 mm to the edge, this one i just eyeballed it untill it fit, then next batch i got is going to be done on a mill, then resold
just widen up the flange holes with a dremel or mill, its got maybe 2 mm to the edge, this one i just eyeballed it untill it fit, then next batch i got is going to be done on a mill, then resold