Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.
Moderator: Moderator
diomike
Spree
Posts: 219 Joined: Mon Jul 23, 1973 10:24 am
Location: Mtl,Can
Post
by diomike » Fri Jun 09, 2006 6:45 pm
what can lead to lack of power on ur scooter.
bitteraspects
CB900F
Posts: 1115 Joined: Sat Dec 31, 2005 7:00 pm
Location: posting via SKII
Post
by bitteraspects » Fri Jun 09, 2006 7:17 pm
vaccum leak, compression leak, bad air/fuel ratio, wrong jetting, low battery power, fauilty cdi, faulty rectifier, bad ground, ect...
you have to be a little more specific.
diomike
Spree
Posts: 219 Joined: Mon Jul 23, 1973 10:24 am
Location: Mtl,Can
Post
by diomike » Fri Jun 09, 2006 7:25 pm
ok today i was driving and around 63km to 65 km it would start making a liltle ratleing sound and have a hard time going past that.
my bolts on my cylender are fine
i havent cleaned my carb sence 2 week's ago.
i have a 70cc, rollerwieghts 7.5, size 100 jet , technic gas pipe, new spark plug and p-flow.
any ideas?
berreta22
Elite
Posts: 509 Joined: Wed Mar 22, 2006 2:04 pm
Location: Grand Rapids,Mi
Contact:
Post
by berreta22 » Fri Jun 09, 2006 10:09 pm
what the * you complainin about??? accordin to my math you gettin darn near 40 mph. I wouldnt be complaining!!!!
1987 Spree 4400 miles 32 mph stock with my 285lb ***
hrnytrtlsgsxr
Elite
Posts: 719 Joined: Sat Dec 31, 2005 7:00 pm
Post
by hrnytrtlsgsxr » Sat Jun 10, 2006 2:57 am
berreta22 wrote: what the * you complainin about??? accordin to my math you gettin darn near 40 mph. I wouldnt be complaining!!!!
you can get that and more just running stock. Wahat are you talking about. he has a dio motor. The 70cc kit should get you to 50mph easily.
MySpree
CBR1000RR
Posts: 3298 Joined: Mon Jul 23, 1973 10:24 am
Location: Troy michigan
Contact:
Post
by MySpree » Sat Jun 10, 2006 10:14 am
wow, what type of bore? polini? and my elite is slowly starting to get there, my dad says he doesnt want me to hop up the elite because he is afrade that i will be going to fast, sooooo what daddy dont know cant hurt him.
noiseguy
Site Admin
Posts: 4430 Joined: Sat Jul 31, 2004 8:00 pm
Location: South Florida
Contact:
Post
by noiseguy » Sat Jun 10, 2006 10:12 pm
MySpree wrote: wow, what type of bore? polini? and my elite is slowly starting to get there, my dad says he doesnt want me to hop up the elite because he is afrade that i will be going to fast, sooooo what daddy dont know cant hurt him.
Myspree, we'd all worry less if you'd wear a helmet, preferably full-face.
I'm wondering if bearings are going. How quickly do these large-bore kits eat up bottomends?
diomike
Spree
Posts: 219 Joined: Mon Jul 23, 1973 10:24 am
Location: Mtl,Can
Post
by diomike » Sat Jun 10, 2006 11:15 pm
wat do u think i can do.
do u think it is my weights or jetting or my carb settings??
yes i do have a dio its an af28 i think.
iam getting a new clutch by polini and pully by molossi
then gears i should have them by 3 weeks .
bitteraspects
CB900F
Posts: 1115 Joined: Sat Dec 31, 2005 7:00 pm
Location: posting via SKII
Post
by bitteraspects » Sat Jun 10, 2006 11:29 pm
dont bother with the polini clutch. its a wasteof money
diomike
Spree
Posts: 219 Joined: Mon Jul 23, 1973 10:24 am
Location: Mtl,Can
Post
by diomike » Sat Jun 10, 2006 11:34 pm
iam getting it cuz it come with my pipe
diomike
Spree
Posts: 219 Joined: Mon Jul 23, 1973 10:24 am
Location: Mtl,Can
Post
by diomike » Sat Jun 10, 2006 11:35 pm
wat do u think is the problem that iam not getting up to speed?
diomike
Spree
Posts: 219 Joined: Mon Jul 23, 1973 10:24 am
Location: Mtl,Can
Post
by diomike » Sun Jun 11, 2006 2:34 pm
i think i noe what the problem is my new pipe isnt siting on correctly.
darat
Veteran OG
Posts: 3133 Joined: Fri Jul 23, 2004 10:24 am
Location: Fraser Michigan
Contact:
Post
by darat » Mon Jun 12, 2006 12:13 am
wait u got the pipe?
MICHIGAN MOPED MAFIA Co Founder VET OG. 95 YAMAHA JOG 70CC
diomike
Spree
Posts: 219 Joined: Mon Jul 23, 1973 10:24 am
Location: Mtl,Can
Post
by diomike » Mon Jun 12, 2006 11:36 pm
i will show u some pics when i get it back from my shop.