Oil pump plug

gza710 · Post by **gza710** » Sun Jan 25, 2015 4:45 pm

I installed a oil pump plug on my dio. After a few blocks it popped off. Do I need to put permartex or something. All I did was tapped it all the way down. Please advise. I'm noobing. Thanks

paulpauly7 · Post by **paulpauly7** » Sun Jan 25, 2015 5:03 pm

use the bolt hole for the original pump and bolt a little plate over it to stop it coming out .Also a little hondabond around the plug befor install helps stop air leaks

curtis966 · Post by **curtis966** » Sun Jan 25, 2015 5:04 pm

You still need to brace it just like the oil pump. I use the original hardware and a piece of steel to hold it in place. A bolt into the plug the bolt to the left and the steel as a brace between the 2.

curtis966 · Post by **curtis966** » Sun Jan 25, 2015 5:05 pm

paulpauly7 wrote:use the bolt hole for the original pump and bolt a little plate over it to stop it coming out .Also a little hondabond around the plug befor install helps stop air leaks

+1 on the sealer as well!

gza710 · Post by **gza710** » Sun Jan 25, 2015 8:10 pm

d*** I'm such a noob. Thanks all

johnny248 · Post by **johnny248** » Mon Mar 02, 2015 6:23 pm

Mine is recessed when I push it all the way in. I didn't use ant sealer, just a little oil on the o-ring. We will see how that works. I also made a little plate and put a spacer between the plug and plate to keep some preload on the plug. Here...scroll down.

viewtopic.php?f=16&t=30606&start=15

Honda Spree and Elite 50 Forums

Oil pump plug

Oil pump plug

Re: Oil pump plug

Re: Oil pump plug

Re: Oil pump plug

Re: Oil pump plug

Re: Oil pump plug