Basically stock with 9.8 -1 gears outcome...

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Simonsr50
Goped
Goped
Posts: 51
Joined: Sat May 21, 2011 12:17 am
Location: Ct

Re: Basically stock with 9.8 -1 gears outcome...

Post by Simonsr50 »

It probably is my compression testers that's shot but I could have swore that 100psi was what I was told by more then one person. Both my elites aredead nuts on my gauge so I assume they are fine and it's jut the gauge that's bad I mean they both have under 1400 miles and are very clean. One question I have kinda off topic is what rpm should I be hitting tucking downhill? Also I weight a little over 200lbs, what rpm should I be on flat maybe a little down hill at WOT on my basically stock setup? Like I said the motor is stock with airbox tab out and a bigger main jet.
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Basically stock with 9.8 -1 gears outcome...

Post by Trafficjamz »

Image

the chart assumes a 90/90 tire and a perfect .8:1 variator ratio.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Post Reply