Dio Gears in a SE50?

Kenny_McCormic · Post by **Kenny_McCormic** » Mon Jul 21, 2008 2:39 am

All of it minus what come in the aftermarket dio gear kit of you choice.

da808fokai · Post by **da808fokai** » Sun Aug 17, 2008 11:07 pm

I've been watching this thread for a while now (my post count definitely doest show it) but am I correct in saying that this would work for a NB50 as well?

Aren't the SE50 and NB50's motors nearly identical?

Kenny_McCormic · Post by **Kenny_McCormic** » Sun Aug 17, 2008 11:10 pm

It would work in a 86-87 NB50, maybe a 85.

da808fokai · Post by **da808fokai** » Sun Aug 17, 2008 11:19 pm

Awesome, thank you... I've been talking to VT about it this past week, but wanted to get clarification before ordering parts.

Lots of great info on this board, did I mention the search function has been my best friend?

Thanks again...

da808fokai · Post by **da808fokai** » Sun Aug 17, 2008 11:27 pm

PimpinSpree wrote:let me get this right, if you look at this picture

i would need to order part number 7. Have the gear on it removed, and then press on the new 8.4 (or whatever) gear. Then take the shaft that comes with gear set machined down to take the splines off, and have the stock se50 gear (part 6 in the picture) pressed onto it?

am i on the right track?

When PimpinSpree mentioned ordering part #7, does that include the axle shaft, or is that just the gear?

Kenny_McCormic · Post by **Kenny_McCormic** » Sun Aug 17, 2008 11:40 pm

You only need the shaft, the gear on it and gear 5 are replaced in a gear change

da808fokai · Post by **da808fokai** » Mon Aug 18, 2008 10:32 pm

I see... So looking at the link I posted, if I ordered the gear would it include the shaft? I don't see a place on any of the parts sites to order just the shaft without the gear.

Am I safe to presume if I order the gear, the shaft will be included in part #7?

Kenny_McCormic · Post by **Kenny_McCormic** » Mon Aug 18, 2008 11:20 pm

Due to the fact that they are pressed together im assuming they count as one part.

teeoce · Post by **teeoce** » Tue Aug 19, 2008 4:30 pm

When you order gears from VT, what exactly do you get?

Kenny_McCormic · Post by **Kenny_McCormic** » Tue Aug 19, 2008 4:33 pm

2 gears.

teeoce · Post by **teeoce** » Wed Aug 20, 2008 9:00 am

Which two gears?

Kenny_McCormic · Post by **Kenny_McCormic** » Wed Aug 20, 2008 2:10 pm

the one on the axle and the one that touches the axle one.

teeoce · Post by **teeoce** » Wed Aug 20, 2008 2:31 pm

How does the gear that goes on the axle come on and off? From the looks of the picture on page one, it doesn't show how it comes off (such as on the earlier models).

Kenny_McCormic · Post by **Kenny_McCormic** » Wed Aug 20, 2008 3:01 pm

With a big * hydraulic press, thats how.

teeoce · Post by **teeoce** » Wed Aug 20, 2008 3:32 pm

Kenny_McCormic wrote:With a big * hydraulic press, thats how.

shet