Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.
Moderator: Moderator
MYSTERE1
Goped
Posts: 84 Joined: Mon Jul 23, 1973 10:24 am
Location: Edmonton, Alberta, Canada.
Contact:
Post
by MYSTERE1 » Wed Nov 09, 2005 8:56 pm
just look at my signature and you tell me if my spree is stock
Mystere
1985 Honda Spree.
Front pully mod, 1" longer belt,
gutted pipe, K&N air filter, #80 main jet,
Intake mod, Leo Vince clutch springs,
40 MPH top speed.
KillinSpree
Elite
Posts: 592 Joined: Mon Jul 23, 1973 10:24 am
Location: Sylvania, OH
Post
by KillinSpree » Wed Nov 09, 2005 9:02 pm
Oh i didnt see all thos mods u had done to ur spree. That must be pretty nice being able to go 40mph constant. My spree takes about a whole street block to get up to 35-38mph. If gas prices shoot any higher im going to have to do some major mods to my spree and get it liscensed so its actually street legal.
wickedSpree
Spree
Posts: 103 Joined: Mon Jul 23, 1973 10:24 am
Post
by wickedSpree » Tue Nov 15, 2005 9:55 pm
I drilled a hole in my pipe when it was stock and I gained 3mph.
ike
Noob
Posts: 2 Joined: Tue May 09, 2006 12:44 am
Post
by ike » Sun May 14, 2006 5:01 pm
where exactly should the holes be drilled?
MySpree
CBR1000RR
Posts: 3298 Joined: Mon Jul 23, 1973 10:24 am
Location: Troy michigan
Contact:
Post
by MySpree » Sun May 14, 2006 9:07 pm
in the middle of the part close to the wheel...
hondaspree86er
BMX
Posts: 45 Joined: Sat Dec 31, 2005 7:00 pm
Location: clarksville indiana
Contact:
Post
by hondaspree86er » Sun May 14, 2006 10:41 pm
i still dont understand where to drill
darat
Veteran OG
Posts: 3133 Joined: Fri Jul 23, 2004 10:24 am
Location: Fraser Michigan
Contact:
Post
by darat » Sun May 14, 2006 10:46 pm
under the pipe
MICHIGAN MOPED MAFIA Co Founder VET OG. 95 YAMAHA JOG 70CC
MySpree
CBR1000RR
Posts: 3298 Joined: Mon Jul 23, 1973 10:24 am
Location: Troy michigan
Contact:
Post
by MySpree » Mon May 15, 2006 8:34 am
i did next to it....
jbarb
Spree
Posts: 202 Joined: Sat Dec 31, 2005 7:00 pm
Location: Port Angeles WA
Contact:
Post
by jbarb » Wed May 17, 2006 11:54 pm
How long of a bit? I read somewhere at least 6" of drill bit. I might try this mod if I can find a long bit.
Is this a dangerous mod in terms of back pressure loss and motor blowing fun?
berreta22
Elite
Posts: 509 Joined: Wed Mar 22, 2006 2:04 pm
Location: Grand Rapids,Mi
Contact:
Post
by berreta22 » Sat May 20, 2006 10:25 pm
All these people are sayin they get 40 or so mph out of em...thats great,take in consideration that some of these people are lighter then others. Weight plays a role in these golf ball sized cyliders so they maybe a little faster or slower. im 275 and i can hit 32 mph...i aint complaining cuz i kno these were not made to be crotch rockets in the first place.
darat
Veteran OG
Posts: 3133 Joined: Fri Jul 23, 2004 10:24 am
Location: Fraser Michigan
Contact:
Post
by darat » Sun May 21, 2006 4:16 pm
i dont think that his spree is stock
MICHIGAN MOPED MAFIA Co Founder VET OG. 95 YAMAHA JOG 70CC
berreta22
Elite
Posts: 509 Joined: Wed Mar 22, 2006 2:04 pm
Location: Grand Rapids,Mi
Contact:
Post
by berreta22 » Sun May 21, 2006 4:22 pm
whos spree? mine? it is stock but now the engine needs to be rebuilt..at least the jug and piston anyways
1987 Spree 4400 miles 32 mph stock with my 285lb ***
darat
Veteran OG
Posts: 3133 Joined: Fri Jul 23, 2004 10:24 am
Location: Fraser Michigan
Contact:
Post
by darat » Sun May 21, 2006 4:28 pm
no the other guy.
MICHIGAN MOPED MAFIA Co Founder VET OG. 95 YAMAHA JOG 70CC
berreta22
Elite
Posts: 509 Joined: Wed Mar 22, 2006 2:04 pm
Location: Grand Rapids,Mi
Contact:
Post
by berreta22 » Sun May 21, 2006 4:30 pm
ok
1987 Spree 4400 miles 32 mph stock with my 285lb ***
darat
Veteran OG
Posts: 3133 Joined: Fri Jul 23, 2004 10:24 am
Location: Fraser Michigan
Contact:
Post
by darat » Sun May 21, 2006 4:32 pm
yeah i know urs dont do that sry for the confusion..
MICHIGAN MOPED MAFIA Co Founder VET OG. 95 YAMAHA JOG 70CC