honda aero 50 variator on a spree
Moderator: Moderator
-
- BMX
- Posts: 35
- Joined: Tue Apr 27, 2010 12:28 pm
- Location: North Little Rock, Arkansas
honda aero 50 variator on a spree
What are the factors of putting a variator from an Aero on the Spree. With some machine work could it not be done? Has anyone on the forum done this or have input. Please save all the swap engine comments or big bore comments I really just want to know what stops it from being done.
Re: honda aero 50 variator on a spree
the variator might be too big, there'd definitely be some machine work involved. you might want to try a smaller variator out of a honda urban express or other old variated moped first.
Re: honda aero 50 variator on a spree
The output shaft on the Spree motor is very small diameter compared to the variated motors. If I guy could machine an insert to go on the engine shaft, that would then allow you so mount the variator on, then every thing would be golden. But............
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree