Polini Corsa , are these the same?
Moderator: Moderator
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Polini Corsa , are these the same?
Bakaracer steered me in the direction of this Killer deal on a Polini corsa, it is $240.00 shipped, the picture is not the correct corsa that fits the Elite SR. the part number is almost identical to the one daywot sells on Ebay, Except for the p in the front and the lack of the / and the .
Question is this the same kit and just pictured wrong?
Sip kit http://www.sip-scootershop.com/EN/Produ ... orsa+.aspx
daywot kit http://cgi.ebay.com/ebaymotors/POLINI-7 ... arQ5fParts
Question is this the same kit and just pictured wrong?
Sip kit http://www.sip-scootershop.com/EN/Produ ... orsa+.aspx
daywot kit http://cgi.ebay.com/ebaymotors/POLINI-7 ... arQ5fParts
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
Re: Polini Corsa , are these the same?
That's the right one. As-long-as it has an 'R' behind the product number, it is the Corsa.
SIP also has great deals on the MHR too.
SIP also has great deals on the MHR too.
Re: Polini Corsa , are these the same?
Yup they are the same. Just have to make sure the R is at the end of the part number. That indicates its the corsa. If no R then its the contessa kit. Now you have to find the polini,malossi or an arrow exhaust to go with that bore to get the full potental of the cylinder.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Re: Polini Corsa , are these the same?
Loved the arrow back in the day, except they always seem to break at the top of the J, and the the bracket that secured it to the block, does arrow even make a pipe for it anymore? or is only used left to fight over?
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
Re: Polini Corsa , are these the same?
Yeah you got to find a used one or find a old shop that still has new ones that's sitting in a warehouse or storage.the polini or malossi one works really good too.or you can buy one of the japan exhaust pipes. Check out webike.they got lots of parts there but a bit pricey
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Re: Polini Corsa , are these the same?
bakaracer wrote:Yeah you got to find a used one or find a old shop that still has new ones that's sitting in a warehouse or storage.the polini or malossi one works really good too.or you can buy one of the japan exhaust pipes. Check out webike.they got lots of parts there but a bit pricey
Do Polini and Malossi still make them? How pricey? I did have a Malossi back in the day(Iknow I say that a lot) that was the reverse of Technigas chamber pipe, it was really loud but bad *!
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Re: Polini Corsa , are these the same?
* now that I think more about it is actually was a similar shape to the technigas , it's been about 16 years ...sorry
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
- z50r-ghost
- CB900F
- Posts: 1191
- Joined: Fri Sep 12, 2008 3:46 am
- Location: blank
Re: Polini Corsa , are these the same?
KingJeff, inthink malossi still makes the dio pipe; I gave seen one recently somewhere. Maybe check SIPscootershop's website. Look at the pics of Bradthreee's minarelli Ruckus build; he has the minarelli version of the malossi racing replica. Man that pipe looks badass!!!
Later, jon
Later, jon
.locked away in a cage my rage has got the best of me
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: Polini Corsa , are these the same?
wow that is killer dealer on a corsa, if it is the real thing.
projects galore
Re: Polini Corsa , are these the same?
Of course it is. SIP has the best prices on these things if you're open to ordering from Europe and not sticking to Daywot, eBay, and your local vendors. *, the MHR is a few bucks more than the Corsa so you basically can get that and a nice stage 6 intake manifold for less than a Corsa stateside.burnt_toast wrote:wow that is killer dealer on a corsa, if it is the real thing.
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: Polini Corsa , are these the same?
yeah def sounds like good stuff. I've always been hesitant ordering from europe, but that was back in day when shipping prices were too high for my tastes. have read lots of good info about SIP so this sounds like win to mesanjuro wrote:Of course it is. SIP has the best prices on these things if you're open to ordering from Europe and not sticking to Daywot, eBay, and your local vendors. *, the MHR is a few bucks more than the Corsa so you basically can get that and a nice stage 6 intake manifold for less than a Corsa stateside.burnt_toast wrote:wow that is killer dealer on a corsa, if it is the real thing.
projects galore
Re: Polini Corsa , are these the same?
SIP is where I got my MHR from among various things.
Re: Polini Corsa , are these the same?
mopedsplus.net has a malossi pipes for the dio..they are 450...but damnn they look like somethin serious
1988 yamaha zuma
polini evolution kit
polini evolution 2 exhaust
polini big reed manifold
dellorto 21mm
keli clutch
keli variator
polini evolution kit
polini evolution 2 exhaust
polini big reed manifold
dellorto 21mm
keli clutch
keli variator
-
- Noob
- Posts: 16
- Joined: Tue Mar 01, 2011 5:52 pm
- Location: USA
Re: Polini Corsa , are these the same?
I was just looking at this website as well, looks like a great place to get parts. Think i am going with a Corsa and wondered if this exhaust would be ok to use. There seems to be two different version. One with "e-pass" and one without? Is it some type of overseas thing, i am guessing it has to do with emissions. Leo Vince SP3 http://www.sip-scootershop.com/EN/Produ ... +SP3+.aspx