Spree Intake is Here 21mm carb

[tazland001]

The spree intakes came in today. Wow. They really add some serious acceleration to my spree with the 48mm kit. Takes off very strong. It was raining and I have to dial it in a bit. Will post pics tomorow. I am running a 21mm carb. hehe. Wait til you see this.

Taz

[Bear45-70]

What is the freight gonna be on this?

[z50r-ghost]

I dont have a spree.... But I can't wait to see them!! -taz's parts are some top notch stuff!!
J

[z50r-ghost]

Do you have any pics of your spree intake mani and your spree performance pipe, Taz?
I cannot wait to see what you came up with for the pipe...

It's about time someone manufactured a pipe for the spree!

j

[Petrock's 1984 Spree]

With the 48bbk, 21mm carb, CT Mani, and exhaust pipe i would bet the spree could go a solid 45 all day long.
Couple in the clutch mod and bigger tire and the wimpy spree engine just turned into a relative beast!

[Bear45-70]

With the 48bbk, 21mm carb, CT Mani, and exhaust pipe i would bet the spree could go a solid 45 all day long.
Couple in the clutch mod and bigger tire and the wimpy spree engine just turned into a relative beast!

Not without the gears it won't.

[dyehardfan]

Ok, so once I find someone to machine my head, I am considering the next step of the resto-mod to be Taz' Carb/Intake kit.

Taz Carb Kit

taz_carb_kit.JPG (35.19 KiB) Viewed 5516 times

http://cgi.ebay.com/ebaymotors/Honda-Sp ... _500wt_698

First question, and this is for everyone, how does this compare to the CT Mani that I see talked about all over the board? Could this be adapted to a 6 reed setup?

Second question, for Taz, is the only available throttle cable color blue? Much rather have a black one...nothing vinyl dye wouldn't fix I guess.

[Bear45-70]

It IS the CT manifold with an adapter to fit the Spree. Yes you can use the 6 petal reeds, but you will not see any performance increase from them.

[dyehardfan]

It IS the CT manifold with an adapter to fit the Spree. Yes you can use the 6 petal reeds, but you will not see any performance increase from them.

Sweet on the IS part, but what about what you had said here:

"The 6 petal compared to 4 petal reeds will improve the bottom end and mid range throttle response and performance. The old multiple carb adage applies here, "a lot of little holes is better than a couple of big holes." The top end will not be hurt and depending on the area of the reed openings can be improved."

viewtopic.php?f=4&t=14843&hilit=CT+Manifold+group

[Bear45-70]

The 6 petal will help the bottom end but without a variator the Spree isn't going to be able to really utilize it. I will be saving my money when this set up goes on my Spree. Increased compression and finding some higher RPM clutch springs will help more than going with the 6 petal reeds.

[dyehardfan]

The 6 petal will help the bottom end but without a variator the Spree isn't going to be able to really utilize it. I will be saving my money when this set up goes on my Spree. Increased compression and finding some higher RPM clutch springs will help more than going with the 6 petal reeds.

Ok, thanks. I'll roll with the original until I get to point of being in the "what the heck can I do next" stage.

Insetad of going off topic, I'd like to know more about these higher RPM clutch springs if you have time for a PM sometime soon.

[dyehardfan]

Taz, can you tell us a little more about the reeds you are using in this kit? Are they metal, fiberglass, carbon-fiber?

[Petrock's 1984 Spree]

If its just the regular CT mani they come with fiberglass reeds

[dyehardfan]

If its just the regular CT mani they come with fiberglass reeds

Cool, good to know. I'm really thinking about going with this thing. Hopefully Taz will chime in with a full breakdown on the kit when he gets a moment.

[Bear45-70]

If this doesn't tell you what you need to know, Nothing will.

http://cgi.ebay.com/ebaymotors/ws/eBayI ... _500wt_956