Page 1 of 1
noob needs help! :0
Posted: Wed Jun 08, 2011 9:30 am
by emrhuskers
ok i have an 87 iowa spree. i also have an 86 spree non iowa for parts. what would you guys swap between the bikes to make the iowa faster. or just some mods i could do. thanks in in advance!!
Re: noob needs help! :0
Posted: Wed Jun 08, 2011 11:22 am
by Mystic
Stop me if I am wrong, I would swap the engines first off and use the iowa for parts
I cant remember right off hand where the restrictions are on the iowa whether exhaust, carb, and or cdi I have hte 86 myself and I am a long way from Iowa
Re: noob needs help! :0
Posted: Wed Jun 08, 2011 1:09 pm
by fightingplankton
use the search function.
but if i remember correctly, 1st thing first is to swap the exhaust(or just remove the washer), but if you do this you also have to change your main jet(to something like a 68 i think) otherwise you will lean out the engine.
Re: noob needs help! :0
Posted: Wed Jun 08, 2011 9:20 pm
by Bear45-70
Do what Plankton said. Do not swap engines, the '87 is as good or better than the '86.